Dmx Mode; Fuse Replacement - American DJ Mystic LED User Instructions

Mystic LED™
connector is the output. For longer cable runs we suggest a
terminator at the last fixture. Note: You can also daisy chain the
power cords, this can only be done with 20 fixtures. After 20
you will need to use a new power outlet. They must be the
same fixtures. DO NOT mix fixtures.
You do not have to assign the units Master/Slave. They will auto-
matically fall into Master/Slave mode.
2. Use the sensitivity knob on the rear of the master unit to make it
more or less sensative to sound..
3. The optional UC3 Controller (not included) may be used to
control different functions including blackout.

DMX Mode:

Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs.
1. This function will allow you to control each individual fixture's
traits with a standard Elation
2. The Mystic LED™ uses four DMX channels to operate see page 8
for the DMX traits.
3. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up specifications that are
included with your DMX controller.
4. Follow the instructions on page 7 to set the DMX address.
5. Use the controller's faders to control the various DMX fixture traits.
Mystic LED™
Locate and remove the unit's power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with a new one. The
fuse holder has a built-in socket for a spare fuse be sure not to confuse
the spare fuse with active fuse.
American DJ Supply - www.americandj.com - Mystic LED™ User Manual Page 9
© ®
Operating Instructions
DMX 512 controller.
®

Fuse Replacement

Mystic LED™
Channel Value
1
0 - 1
2 - 127
128 - 135
136 - 253
254 - 255
2 LED COLORS & RAINBOW EFFECT
0 - 41
42 - 83
84 - 125
126 - 167
168 - 209
210 - 251
252 - 255
0 - 255
3
0 - 63
64 - 127
128 - 255
4
0
1 - 85 CLOCKWISE ROTATION FAST - SLOW
86 - 170 COUNTER CLOCKWISE ROTATION
171 - 178
179 - 255
Note: When the Rainbow effect is active (Channel 3, values
64 -127), Channel 2 will control the speed of the Rainbow
Effect (values 0-255).
American DJ Supply - www.americandj.com - Mystic LED™ User Manual Page 10
© ®
DMX Traits
Function
LED OFF/ON & STROBE
LED OFF
STROBE SLOW - FAST
LED ON
RANDOM STROBE SLOW - FAST
LED ON
SPEED CONTROL
RED
RED & GREEN
GREEN
GREEN & BLUE
BLUE
BLUE & RED
ALL ON
RAINBOW EFFECT SLOW - FAST
RAINBOW EFFECT
RAINBOW EFFECT OFF
RAINBOW EFFECT ON
RAINBOW EFFECT OFF
LED ROTATION
NO ROTATION
SLOW - FAST
NO ROTATION
RANDOM ROTATION SLOW - FAST