Table of Contents
Advertisement
Chapter 3
AT-3624TS Connectivity
Figure 10: AT-3624TS Front
and Back Panels
The CentreCOM AT-3624TS is a multiport repeater designed to offer
maximum flexibility for both workgroup and department needs.
Specifically, the AT-3624TS uses two 50-pin Telco connectors. In addition,
you can connect an AT-ADAPT-2, or an octopus cable, to the AT-3624TS,
enabling you to use RJ45 connectors.
This manual refers to two or more chassis-mounted repeaters, at least one
of which is manageable, as a department concentrator. The term hub refers
to either a standalone repeater (i.e., a single manageable repeater) or a
department concentrator configuration.
The AT-3624TS repeater is based on an Application-Specific Integrated
Circuit (ASIC) developed by ATI for maximum functionality and
reliability. Figure 10 shows the front and back panels of the AT-3624TS
model repeater.
Telco connectors
Front
Back
Note
Port activity LEDs
Interrepeater bus port
AUI port
Hub status
LEDs
13
15
17
19
21
23
15
Advertisement
Table of Contents
Need help?
Do you have a question about the CentreCOM AT-3624TS and is the answer not in the manual?
Questions and answers