Onkyo TX-NR807 Firmware Update

Hide thumbs Also See for TX-NR807:

Download this manual See also: Service Manual, Instruction Manual

We are pleased to offer this firmware update for the best possible performance of your AV Receiver.

A firmware update is now available through the Network connection on the TX-NR807. This update will

address the following items:

1. New Windows 7 compatibility, adds "Play to" function for Audio streaming from PC running

Windows 7 (Oct 2009 release date).

2. Improved picture quality for iPod/iPhone through UP-A1.

We hope you enjoy the improved functionality this update provides to your AV Receiver.

Firmware Update Procedure for TX-NR807

Need help?

Do you have a question about the TX-NR807 and is the answer not in the manual?

Page 1 Firmware Update Procedure for TX-NR807 We are pleased to offer this firmware update for the best possible performance of your AV Receiver. A firmware update is now available through the Network connection on the TX-NR807. This update will address the following items: 1.
Page 2 Firmware Update Procedure TX-NR807 allows you to update firmware using Step4: Network connection on rear panel. Select “Via NET” and push [ENTER]. Notice: 1. Make sure your AV receiver and TV are turned on and Ethernet cable is connected to rear panel of the AV receiver.
Page 3: Troubleshooting
If the error persists, please contact Onkyo Support (indicated at the end of this page) and provide the error code. Y0909-1 SN 29400250 (C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved. * 2 9 4 0 0 2 5 0 *...