Nokia Image Viewer SU-2 User Manual page 8

G e t t i n g s t a r t e d
4. Connect the Nokia Image Viewer to the RCA connector on your TV.
If your TV does not have a RCA connector, you need a RCA/SCART
adapter, which you can obtain from an electrical supply store. If you
are using a wide screen TV set, the TV screen should be set to a 4/3
ratio.
5. Switch on the Nokia Image Viewer by pressing and holding the
power on/off/rotate button for 3 seconds.
6. Switch on the TV and select the right AV channel. The Nokia logo
appears on your TV screen.
7. Make sure that your compatible phone is switched on. Then, enter
your phone's Bluetooth menu and activate the Bluetooth
connection.
8. Enter the submenu where you can set the phone to search for
compatible Bluetooth devices, and start the search. The phone
searches for all Bluetooth devices within up to 10 meters and shows
them in a list.
9. Select SU-2 from the list.
10.Key in the four digit verification code ("pair") to your phone. The code
is shown on your TV screen in the top right corner.
Once you have keyed in the verification code, your phone sends it to
the Nokia Image Viewer. See Using the Nokia Image Viewer with
several paired phones on page 10.
The blue indicator light shows that the Bluetooth connection is
active. The Nokia Image Viewer appears in the phone menu where
you can view the Bluetooth devices that are currently paired with
your phone.
11.Transfer images from the phone to the Nokia Image Viewer.
12.When you want to stop using the Nokia Image Viewer, press and hold
the power on/off/rotate button for 3 seconds.
8