Refreshing The Ftsmc Display; Figure 3-8. Warning And Inventory Error Icons; Figure 3-9. Threshold Warning Icon - NEC Express5800/320Ma Administrator's Manual

Figure 3-8 shows a "no inventory found" icon next to the CPU Enclosure icons.

Figure 3-8. Warning and Inventory Error Icons

Figure 3-9 shows a threshold warning icon at the Voltage Sensor. Its parent nodes
display the yellow warning icon.

Figure 3-9. Threshold Warning Icon

Refreshing the ftSMC Display

You can right-click the ftServer (Local) root node to enable or disable each of three
refresh options. These options cause ftSMC to refresh, or update, the information in the
details pane when the specified event occurs. You should enable these options so that
the details pane and the node icons update when you complete an action or when a
state change occurs. When enabled, a check mark appears in front of the option, as
shown in Figure 3-10.
Performing ftSMC Tasks
ftServer Management Console 3-11