Removing The Lcd Panel - NEC Versa S940 Disassembly Manual

Removing the LCD Panel

To remove the LCD panel, first remove the LCD module (see
then perform the following steps:
1. Use a pin to remove the rubber cover on the LCD module as shown in Fig. 20
2. Remove all screws as shown in Fig. 20 and remove carefully the LCD cover.
Fig. 20 Removing the rubber covers & screws on the LCD Module
3. Carefully removing the LCD Bezel as shown in Fig. 21
Fig. 21 Removing the LCD Bezel
NEC Versa S940/PB EasyNote A7 Disassembly Manual
Removing the LCD Module),
A = M2x7 Silver
B = M2.5x5 Black
Page 17