Figure 2-3. Scan-Related Parameters - NEC Express5800/320Ma User Manual

If an instance's value exceeds its threshold:
•
and Scan retry is disabled, a threshold violation has occurred. In this case, SAM
does whatever it has been configured to do in the event of a threshold violation. For
instance, it might send email notification or run a program.
•
and Scan retry is enabled, there is not yet a threshold violation, and SAM
continues to scan at the Scan retry poll rate (in seconds).
The maximum value for this parameter varies per instance.
Email Alert ID. A user-defined string that identifies the alert to be sent. This box must
contain either the value "Default," if the associated instance will send the default alert,
or an identifier you created in the Email Alert Setup tab.
Creating a nondefault alert ID and associating it with an instance is described in
"Nondefault Alert Notification" on page
The string may be of any length. "Default" is the default setting.
Program to launch (optional). The full path name of the program you want to launch
(execute) in the event of a threshold violation. The program that runs must not be
interactive, as no window is displayed. Also, the program must exit by itself. This box
is left blank by default.
Figure 2-3 shows some of the parameters related to scanning. See
an Instance" on page 2-7
parameters.

Figure 2-3. Scan-Related Parameters

N O T E
See "How SAM Scans an Instance" on page 2-7
information about the scan-related parameters.
for an explanation of how SAM uses the scanning
3-4.
SAM Settings Reference
Instance Parameters
for more
"How SAM Scans
2-3