Table of Contents
Advertisement
Before using for the first time
The stainless steel surface and the
shelf trims have a protective cover to
prevent scratching during
transportation.
^ Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^ Polish stainless steel surfaces using
a suitable cleaning agent following
the manufacturer's instructions on the
packaging.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
The refrigerator section/Stayfresh zone
and freezer section are switched on
together by pressing the master switch
on the right hand side of the control
panel, or by pressing the On/Off button
on the left hand side of the control panel.
^ Press the master switch on the right
hand side of the control panel.
The refrigerator section temperature
display lights up.
Switching on and off
Bars light up in the freezer section
temperature display.
The appliance starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
To switch the refrigerator section /
StayFresh zone off separately
The refrigerator section/StayFresh zone
can be switched off without having to
switch off the freezer section. This is
useful e.g. whilst on holiday.
^ Press the refrigerator
section/StayFresh zone On/Off button
on the left hand side of the control
panel.
The temperature display for the
refrigerator section goes out, and the
refrigerator section/StayFresh zone is
switched off.
15
Hide quick links:
Advertisement
Table of Contents
