Advertisement
^ Pull the condenser unit out of its
housing by the handle.
^ Hold the condenser unit up to the
light
^ Check to see if there is any fluff
inside it.
The arrows in the illustration above
indicate where to look.
.
If you cannot see any fluff:
^ Replace the condenser unit (see
following page).
If you can see some fluff:
^ Clean the condenser unit as
described below.
^ When rinsing the condenser unit,
make sure you position it as shown in
the next two illustrations.
^ Use a shower head or similar to rinse
the unit out
.
27
Advertisement
