Advertisement
It is very important to set the correct
temperature for storing food in the ap-
pliance. Micro organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly. Tem-
perature influences the growth rate of
these micro organisms. Reducing the
temperature reduces their growth rate.
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– if too much food is stored in it at
once,
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures (cli-
mate ranges). Do not use in ambient
temperatures for which it is not de-
signed.
We recommend a temperature of
in the refrigerator section.
The temperature in the Stayfresh (0 °C)
zone is controlled automatically and is
maintained at approx. 0 °C.
Use the two buttons to the right hand
side of the temperature display to set
10
the temperature for the refrigerator sec-
tion.
Press the
Upper button: to increase the tempera-
ture (it gets warmer)
Lower button: to reduce the tempera-
ture (it gets colder)
The temperature being set will flash in
the display.
When pressing the buttons the follow-
ing are shown in the display:
– When first pressed: The
– Each subsequent press of the but-
ton:
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in:
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current
ture of the refrigerator section is auto-
matically shown.
If you have adjusted the temperature,
checking the temperature display as it
will take this long for the display to
show the accurate temperature of the
appliance. If, after this time, the temper-
ature is too high or too low, you will
need to adjust it again.
flashes.
tempera-
and
before
Advertisement
