Miele K 12420 SD Operating And Installation Manual page 34

Changing the door hinging
^ Unscrew upper hinge pin a using
the spanner supplied and refit on the
opposite side.
^ Using a screwdriver remove covers
b.
^ Refit covers b from the back on the
opposite sides, and then click them
into place at the front
^ Remove plug c from door bearing
bush in the door and refit on the
opposite side.
^ Hang the door on upper hinge pin a
and then close the appliance door.
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
34
^ Using a second person, carefully tip
the appliance backwards and then fit
hinge pin b together with hinge bush
c from below into hinge plate e on
the left hand side.
^ Align the door with the appliance
housing using the long slots in hinge
plate e. Then tighten the screws.
^ Refit cover a on the left hand side.