^ Switch the dishwasher off.
^ Turn the programme selector to the
"Stop" position.
^ Press the "Start" button in and whilst
holding it in switch the dishwasher on
using the "On/Off" button. Release the
"Start" button within two seconds.
The "Salt" indicator light will start flash-
ing
If a different indicator light comes on or
flashes, the process must be repeated.
The "Rinse aid" indicator light will come
on if you have not yet added rinse aid
or if rinse aid needs replenishing.
^ Turn the programme selector to the
position that corresponds to your wa-
ter hardness level (see chart below).
1 - 4
0.2 - 0.7
5 - 7
0.9 - 1.3
8 - 11
1.4- 2.0
17 - 21
3.1 - 3.8
22 - 24
4.0 - 4.3
25 - 31
4.5- 5.6
32 - 70
5.8 -12.6
The dishwasher is set at the factory for
a hardness level of 2.2 –2.9 mmol/l
(12 -16 °d ).
For a water hardnesss of 1.8 mmol/l,
(10 °d) turn the programme selector
to the "3 o'clock" position.
"1 o'clock" position
"2 o'clock" position
"3 o'clock" position
"5 o'clock" position
"6 o'clock" position
"7 o'clock" position
"8 o'clock" position
15