Table of Contents
Advertisement
Operating the dishwasher
Interrupting a programme
A programme is interrupted as soon as
the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
Warning:
Water in the dishwasher may be hot.
Danger of scalding!
Only open the door if absolutely
necessary and exercise extreme cau-
tion when doing so. Before closing
the door again, leave it ajar for ap-
prox. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly making
sure that it clicks into place.
36
Changing a programme
A programme can be changed at any
time.
Turn the programme selector switch
to the new programme.
The new programme will start from the
point the other programme was at
when the programme was changed.
If, when changing a programme, you
turn the programme selector past the
"Stop" position, e. g. from "Economy 45°"
to "Universal 55°", and the programme
selector is on the Stop position for
longer than one second, the pro-
gramme initially selected will be can-
celled (the "Wash/Rinse" indicator light
(15) goes out and the "Start" (16) indi-
cator light comes on). This also hap-
pens if the programme selector stands
for longer than one second between
"Universal 65°" and "Pre-Wash". The
newly selected programme then starts
from the beginning and you will have to
press the "Start" button to commence the
programme.
Advertisement
Table of Contents
