Before Using The Appliance For The First Time You Require; External Water Softening System; Filling The Salt Reservoir - Miele G 1832 Operating Instructions Manual

Before using the appliance for
the first time you require:
– Approx. 1 kg dishwasher salt*,
– Domestic dishwasher detergent*,
– Rinse aid* formulated for domestic
dishwashers.
Every dishwasher is tested at the
factory.
There will be residual water in the
appliance from this test. It is not an
indication that it has been used
previously.
This dishwasher is fitted with a water
softener sensor which automatically
sets the water softener unit for the
local water hardness level.
* In the UK, Miele branded products
are available from the Miele Spare
Parts Department or via the internet
on www.miele.co.uk.
Before using for the first time
External water softening
system
If your dishwasher is connected to an
external water softening system which
uses salt to reactivate, you will still need
to programme the dishwasher to the
correct water hardness level to achieve
good cleaning results.
^ Set the water softener unit of the
dishwasher to the water hardness
level of the water which is supplied
from the external water softening
system.
If you do not know what this is, then
set the value at 1.4 mmol/l (8 °d) (see
Settings menu J, External water
softening system).

Filling the salt reservoir

In order to achieve good cleaning
results, the dishwasher needs to
operate with soft water. Hard water
results in the build-up of calcium
deposits on crockery and in the
dishwasher.
Mains water with a hardness level
higher than 0.7 mmol/l (4 °d – German
scale) needs to be softened. This takes
place automatically in the integrated
softener unit.
The softener unit is suitable for a water
hardness level of up to 12.6 mmol/l
(70 °d). It requires dishwasher salt.
17