The Dishwasher Does Not Fill/Drain - Miele G 1142 Operating Instructions Manual

Problem solving guide

The dishwasher does not fill/drain.

Problem
The Inlet/Drain check
indicator flashes.
The dishwasher stops
during a programme.
The Inlet/Drain
indicator flashes.
44
Possible cause
The stopcock is
closed.
Water intake is
restricted.
Water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
Remedy
Open the stopcock fully.
Before rectifying the problem
you must:
– Switch the dishwasher off
with the On/Off button K.
– Open the stopcock fully.
– Clean the water inlet filter
(see "Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
– Clean the filter combination.
See "Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve.
See "Maintenance".
– Remove any kink in the drain
hose.