Table of Contents
Advertisement
FORMAT MEMORY CARD MENU
You can use the 'Format Memory Card' menu to delete all of the content that is currently on your
camera's memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera's memory card.
This option will delete all of the content at one time. If you would like to delete individual images,
use the delete menu in the camera's Playback mode.
Note: Restoring factory defaults or formatting the camera may result in the loss of data.
Please ensure you have backed up your images before you attempt this.
Press the SET button to open the menus for the current mode.
1)
Press the SET button to open the menus for the current mode.
Press the LEFT or RIGHT button to scroll and select the 'Format Memory Card' menu.
2)
3)
Press the UP or DOWN button to highlight a specific option:
- CANCEL: To exit without formatting the SD Memory Card, select 'Cancel' and press the
SET button.
- FORMAT: To proceed with the format, select "Yes" and press the SET button.
You will be asked to confirm the formatting of the memory card.
•
Select 'No' and press the SET button to exit without formatting.
•
Select 'Yes' and press the SET button to begin the format.
The memory card will be completely formatted.
FIRMWARE (FACTORY DEFAULT SETTINGS) MENU
Use the 'Firmware' menu to view the Firmware version on your camera or to reset your camera
settings to the Factory Default Settings.
1)
Press the SET button to open the menus for the current mode.
Press the LEFT or RIGHT button to scroll and select the 'Firmware' menu.
2)
The 'Default Setting' option is automatically selected.
3)
4)
Press the SET button to reset the camera to the Factory Default Settings.
You will be asked to confirm the resetting to the Factory Default Settings.
32
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ViviCam S124 and is the answer not in the manual?
Questions and answers
I plug my camera into the computer and the computer goes haywire and shuts down when I install pictures
nothing is happening when i plugmy camera into my computer.
If your Vivitar ViviCam S124 camera is not recognized when plugged into your computer, try the following steps:
1. Check the USB Connection – Ensure you are using the supplied USB cable and that it is securely connected to both the camera and the computer.
2. Power On the Camera – The camera should be turned on when connected.
3. Look for ‘MSDC’ on the LCD – When properly connected, ‘MSDC’ should appear on the camera’s screen.
4. Try a Different USB Port – Some USB ports may not work correctly, so try another port on your computer.
5. Check Computer Recognition – Open your computer’s file explorer and look for the camera under connected devices or removable storage.
6. Install Necessary Drivers – If required, install any drivers or software that came with the camera.
7. Restart Your Computer – Sometimes, a simple restart can resolve connectivity issues.
8. Use a Card Reader – If the camera is still not recognized, remove the SD card and use a card reader to transfer files.
If the problem persists, there may be an issue with the USB cable, the camera’s USB port, or the computer’s settings.
This answer is automatically generated