Miele KWFN 8705 SE ed Operating And Installation Instruction page 45

^ Open the lower appliance door, move
it downwards and take it off.
^ With the upper door g closed, pull
hinge pin f downwards to remove it.
^ Open the upper door, and pull it
downwards and off.
^ Remove cover h, and unscrew hinge
bracket i.
^ Fit hinge pin j in the second hole of
hinge bracket i.
^ Refit bracket k and cover l turned
through 180° on the opposite side.
^ Screw hinge bracket i into the
opposite side.
The
the left hole of the hinge bracket.
^ Turn cover h through 180°, and fit it
on the other side.
^ Exchange cover m in the middle of
the appliance with hinge bracket o.
To do this:
has to be screwed into
Unscrew cover m and hinge bracket
o, turn them around and screw in on
the opposite side.
^ Pull bearing bush n downwards out
of hinge bracket o and refit it from
above into the hinge bracket.
^ Remove spacer p with a screwdriver
and refit it on the opposite side.
^ Remove plugs q from the door
bearing bushes in the doors and refit
on the opposite side.
^ Hang the upper door on hinge pin j
and then close the appliance door.
^ Push middle hinge pin f from below
through hinge bracket o into the
upper appliance door.
^ Check that the upper door is
correctly aligned. If necessary align it
using the long slots in hinge bracket
o.
^ Hang the lower door in hinge bracket
o then close the appliance door.
45