Advertisement
The number of hours the appliance has
been in operation is stored in memory.
The operating hours counter tells you
when the grease filters need to be
cleaned.
After 30 hours of operation (or another
time if the operating hours counter has
been altered), the grease filter indicator
lamp will light up. The grease filters
must then be cleaned.
Afterwards, the filter operating hours
counter must be reset.
^ To do this, press and hold the grease
filter control in for approx. 3 seconds
while the fan is switched on.
The indicator lamp for the control will
go out.
To check the percentage of time set
already used:
^ Press the On/Off control to switch the
fan on.
^ Press and hold the grease filter
control.
One or more of the indicator lamps for
the
/
controls will flash.
The number of flashing lamps shows
the percentage of the operating time
which has already been used up.
1 lamp
= 25 %
2 lamps = 50 %
3 lamps = 75 %
4 lamps = 100 %
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.
15
Advertisement
