Flymo Contour Cordless XT Original Instructions Manual
  1. Manuals
  2. Brands
  3. Flymo Manuals
  4. Trimmer
  5. Contour Cordless XT
  6. Original instructions manual

Flymo Contour Cordless XT Original Instructions Manual

Flymo cordless telephone user manual
Hide thumbs Also See for Contour Cordless XT:

Advertisement

Table of Contents

See also: Original Instruction Manual
Contour
®
Cordless XT
Original Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Contour Cordless XT and is the answer not in the manual?

Questions and answers

Related Manuals for Flymo Contour Cordless XT

Summary of Contents for Flymo Contour Cordless XT

  • Page 1 Contour ® Cordless XT Original Instructions...

  • Page 2: Carton Contents

    Safety Lock-off Switch Steady Handle Lower Shaft IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK WARNING.

  • Page 3: Battery Pack

    10. Do not charge the battery or use the unit in an explo- sive or corrosive environment. Avoid areas where flammable liquids or gases are present to avoid cre- ating a fire or explosion. 11. Do not attempt to repair the unit including the battery. Nylon line replacement and cleaning the unit are the only items suitable for user maintenance.

  • Page 4: Charging The Battery Pack

    Assembly Instructions cont’ Safety Guard Assembly (D) & (E) 1. Locate the safety guard (D1) over the cutting head (D2). Ensure the nylon line is fed through the hole in the safety guard as illustrated in fig D. 2. Push into location and turn safety guard in the direc- tion illustrated in Fig E, until a click is heard and the safety guard is securely locked in position.
  • Page 5 √ How to trim and edge • WARNING • The use of eye protection is recommended. Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Do not allow cutting head to rest on the ground. Do not overload your trimmer.
  • Page 6 Remember ! Your product is designed to use only nylon line with a maximum diameter of 1.5mm. Use only gen- uine Flymo nylon line. 1. Take approximately 10 metres of line. Insert 15mm of line into the hole in the spool (T) and wind line in the di- rection of the arrows on the top of the spool.

  • Page 7: Maintenance

    • WARNING Remove the Battery Pack before attempting any main- tenance or adjustment. Cutting head continues to ro- tate after the trimmer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard. Caring for your Product After you have finished using your product, follow the pro- cedure below:...

  • Page 8: Replacement Parts

    WARNING Remove the Battery Pack before attempting any maintenance or adjustment. FAULT LINE NOT FEEDING LINE TOO SHORT TRIMMER VIBRATES CONTINUOUS CLATTER- ING NOISE LINE SNAPS CONTINU- OUSLY WHEEL STOPS TURNING IF NONE OF THE ABOVE OR IF FAULT PERSISTS Spool and Line Reference no.: FLY047...

  • Page 9: Ec Declaration Of Conformity

    Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copy- right © 2010 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks of 5773748-01 Guarantee &...

Table of Contents

Save PDF