Table of Contents
Advertisement
3.3.4 Alarm Setting
This function enables users to conduct the alarm input/output setting and event setting.
Motion Setup
Motion information is processed by splitting the screen into 64 areas. Each area can
be selected by clicking with the mouse, and the selected area is highlighted. The area
which uses the motion information as an event is shown in blue, while the area which
does not use the information is indicated empty.
Applicable to each of the 4 channels and Quad screen.
Motion Detection Setting
Enable
Checks this item when using the motion information.
-Sensitivity
Sets up the sensitivity of a motion. This item has a value between 10 ~ 255. Lower
value means high sensitivity so that a motion event occurs even for a slight
movement.
-Motion dwelling time
Sets up the event duration time when a motion occurs. This item can have a value
between 0 ~ 6 seconds. When an event occurs, the motion icon at upper right of
the screen blinks for the specified period.
-Enable down FPS
Increases FPS of the video transferred through the network when a motion occurs.
- 14 -
Advertisement
Table of Contents
