Table of Contents
Advertisement
Setup
7
Press " to select "CODE" and then use \ or | to select the desired
country code. (See page 44.)
8
Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP
or RETURN.
Important!
• Be sure to try playing back the disc to confirm that the parental level setting is
working correctly. If it is not working correctly, try changing the country code.
Changing the parental level
1
While a disc is stopped, press SETUP to display the Setup screen.
2
Use ' or " to select the "
3
Press ENTER to display the password verification screen.
4
Use ', ", \ or | to enter the 4-digit password that was set previously.
• Press ' or " to select the number.
• Press \ or | to move to the place where you enter the number.
• If you enter the wrong number three times in succession, the normal
screen reappears.
• When entering numbers,
digits are changed to
If you forget your password, you can erase your current password by
pressing
(F.ADV) four times.
5
After the screen for selecting level appears, use \ or | to change the
parental level.
6
Press " to select "CODE" and then use \ or | to select the desired
country code. (See page 44.)
7
Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP
or RETURN.
46
GB
PARENTAL SETUP".
changes to
digit by digit. Make sure all
before performing step 5.
Advertisement
Table of Contents
