Flying Saw with SIMOTION
4.3
Installing the standard SIEMENS software
Minimum required releases
Table 4-3 Versions
Component
STEP 7
SIMOTON SCOUT
WinCCflex Advanced
Installation
Please install the following
•
Step 7 V5.4 incl. SP2
•
SIMOTION SCOUT V4.1.1.6
•
WinCCflex 2007 Hotfix 4 Advanced
(with the option: Integration in Step 7)
Please follow the instructions of the installation programs.
4.4
Downloading the user program and parameterizing the drive in
the SIMOTION D demonstration case
4.4.1
De-archiving the SIMOTION project
•
Open SIMOTION SCOUT
•
De-archive the SIMOTION project and open it using SIMOTION
SCOUT
4.4.2
Resetting SIMOTION D435 to the factory settings
In order to obtain a fixed starting point for the description on how to
download the user program into the demonstration case, restore the factory
setting at the demonstration case as described below:
•
Power-down the demonstration case
•
Set the mode switch SIMOTION D435 to setting 3 (MRES)
•
Power-up the demonstration case
V 1.4
Section B: The application example as demonstration
I
Version.
V5.4 + SP2
V4.1.1.6
2007 Hotfix 4
Release 06/06/08
t lli
th h d
A4027118-A0414
system
d
ft
28/107