Unit Description; Product View; Specifications - Shindaiwa T230 Owner's/Operator's Manual

Unit Description

Using the accompanying illustrations as
a guide, familiarize yourself with this unit
and its various components. Understanding
the product helps ensure top performance,
long service life, and safer operation. See
Figure 4.
WARNING!
Do not make unauthorized modifica­
tions or alterations to any of these units
or their components.

Specifications

T230 Dry Weight (less attachments) .........................4.6 kg/10.2 lb.
T230X Dry Weight (less attachments).......................4.7 kg/10.4 lb.
C230 Dry Weight (less attachments) .........................4.9 kg/10.8 lb.
Engine Model ............................................................ Shindaiwa S230
Engine Type ............................. 2-cycle, vertical-cylinder, air-cooled
Bore x Stroke ........................................... 32 x 28 mm/1.26 x 1.10 in.
Displacement .......................................................... 22.5 cc/1.4 cu. in.
Maximum Power Output ...... 1.1 HP (0.8 kW) @ 7500 RPM (min
Fuel/Oil Ratio ..................................................... 50:1 with Shindaiwa
*Specifications are subject to change without notice.
Prior to Assembly
Before assembling, make sure you have all
the components required for a complete
unit:
 Engine assembly.
 Outer tube assembly.
 Cutting attachment shield.
 Cutting attachment (trimmer head,
or brushcutter blade).
 Correct operators handle (see page 8).
Gearcase
Trimmer Head
Gearcase
Trimmer Head
Gearcase
Brushcutter
Blade
Figure 4
-1
Premium 2-cycle mixing oil
 Kit containing cutting attachment
shield mounting bracket and hardware,
operator's handle mounting bracket and
hardware, gearcase tool holder, this
manual and tool kit for routine mainte-
nance. Tool kits vary by model and may
include a hex wrench, spanner and a
combination spark plug wrench/screw-
driver.
Carefully inspect all components
for damage.
Outer Tube
Handle
(for trimmer use only)
Cutting
Attachment
Shield
Handle
Outer Tube
Barrier
Cutting Attachment
Shield
Throttle
Trigger
Outer Tube
Cutting Attachment
Shield
Fuel Tank Capacity .................................................... 554 ml/18.7 oz.
Carburetor Type ................................ Walbro WYL, diaphragm-type
Ignition .......................... One-piece electronic, transistor-controlled
Spark Plug .................................................................... Champion CJ8
Air Cleaner Type .................. Non-reversible flocked filter element
Starting Method .........................................................................Recoil
Stopping Method ..............................................................Slide switch
)
Transmission Type .............................Automatic, centrifugal clutch
Grip
Ignition
Switch
Tank
Protector
Throttle GRAss TRIMMER
Trigger
Grip
Ignition
Switch
Hanger
Tank
Protector
Throttle
Trigger
GRAss TRIMMER
Ignition
Switch
Shoulder
Strap
Tank
Protector
Handlebar
BRUsHCUTTER
(for EMC compliance use NGK BMR6A)
IMPORTANT!
The terms "left", "left­hand", and "LH";
"right", "right­hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
Spark
Plug
Fuel
Tank
T230
Spark
Plug
Fuel
Tank
T230X
Spark
Plug
Fuel
Tank
C230
w/bevel gear
5