Advertisement
INSTALLATION INSTRUCTIONS
DIMENSIONS AND MEASUREMENTS OF COMPONENTS FOR
CEILING PLATE 4 " WIDE X 18 " LONG
DISTANCE BETWEEN SETS OF MOUNTING HOLES: 1st SET 12 ", 2nd SET 14 ", 3rd SET 16 "
ADDITIONAL POSSIBLE COMBINATIONS OF MOUNTING HOLE DISTANCE 13 " & 15"
THREAD SIZE OF SWIVEL SHAFT & CEILING PLATE BUSHING 1/2 " X 20
VEL-
CABLE ACCESS HOLE
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
A.
From ceiling to inverted bottom of projector: 5 1/2 "
B.
Length of position adjustment knuckle assembly: 3 1/2 "
C.
Lens offset from center of lens to center of mounting bushing: 3"
D.
Ceiling to center of lens: 7 "
E.
Ceiling to top of inverted projector: 8 7/8 "
F.
Mounting screws M4 X 12 & 30 mm long metric flat head phillips.
SHARP MOUNTING BRACKET AN-CM70
ATTACHMENT PLATE WITH POSITIONING ASSEMBLY:
15
"
12"
14"
16"
18"
CENTER BUSHING 7/8" DEEP
1/2X20 THREADED HOLE
PAGE 11
CEILING BRACKET AN-CM270
VEL-
4"
Advertisement
