DieHard Portable Power 1150 Operator's Manual
Hide thumbs
Also See for Portable Power 1150:
- Operator's manual (17 pages) ,
- Owner's manual (11 pages) ,
- Operator's manual (15 pages)
Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for DieHard Portable Power 1150
Summary of Contents for DieHard Portable Power 1150
- Page 1 OPERATOR’S MANUAL Portable Power 1150 Model No. 28.71988 Read and follow all Safety Rules and Operating Instructions before Every Use of this Product. SAvE THESE INSTRUCTIONS. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. 0099001002-01...
- Page 2 This warranty gives you specific legal rights; you may also have other rights, which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179 FOR CUSTOMER ASSISTANCE OR REPLACEMENT PARTS, CALL TOLL-FREE FROM 7 AM TO 5 PM CT, MONDAY THROUGH FRIDAY: 1-800-SEARS-64 (1-800-732-7764) IMPORTANT: READ AND SAvE THIS SAFETY AND INSTRUCTION MANUAL.
-
Page 3: Personal Precautions
Do not put fingers or hands into any of the jump starter’s outlets. Do not expose the jump starter to rain or snow. To reduce the risk of electric shock, turn off and/or unplug the jump starter before attempting any maintenance or cleaning. Simply turning off the controls will not reduce this risk. Do not operate the jump starter if it has received a sharp blow, been dropped or otherwise damaged in any way;... -
Page 4: Follow These Steps When Connecting To A Battery
2.15 Clean the battery terminals before using the jump starter. During cleaning, keep airborne corrosion from coming into contact with your eyes, nose and mouth. Use baking soda and water to neutralize the battery acid and help eliminate airborne corrosion. Do not touch your eyes, nose or mouth. - Page 5 ASSEMBLY INSTRUCTIONS Remove all cord wraps and uncoil the cables prior to using the jump starter. FEATURES jump Start On/Off switch Inverter/Compressor switch Digital Display Plastic lens cover (2) Light bulbs (2) 12V DC power outlets (2) 110V AC household power outlets.
- Page 6 The charger will automatically go into maintain mode and maintain the battery at full charge without damaging it. Charge the jump starter as soon as possible after use. Do not use the jump starter while charging the internal battery. You may also charge the internal battery while driving, using a male-to-male charger cable (part number 94500109 –...
- Page 7 The DC power outlet is wired directly to the internal battery. Extended operation of a 12V DC device may result in excessive battery drain. Recharge immediately after unplugging the 12V DC device. Appliance Type Estimated Wattage Estimated Usage Time Cell Phone 4 watts 66 hours Fluorescent Light...
- Page 8 NOTE: To prevent overheating, the compressor has built-in thermal protection that will turn the compressor off before it overheats. If the compressor shuts off, wait a few minutes and it will automatically restart when the compressor cools. NOTE: The air compressor is rated for 150 PSI. Estimated Time for Inflating Vehicle Tires 13"...
- Page 9 Keep the jump starter dry. DO NOT allow the jump starter to come into contact with rain or moisture. DO NOT operate the jump starter if you, the jump starter, the device being operated or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury or death.
-
Page 10: Maintenance Instructions
8.11 Powering a 120v AC Device To operate a 120V AC device: Ensure that the battery clips are securely on the storage holders. Open the protective cover of the AC power outlet on the front panel of the jump starter. Make sure the 120V AC device to be operated is turned OFF. -
Page 11: Troubleshooting
10.5 IMPORTANT: • CHARGE IMMEDIATELY AFTER PURCHASE • KEEP FULLY CHARGED Charge the jump starter internal battery immediately after purchase, after every use and every 30 days. All batteries are affected by temperature. The ideal storage temperature is at 70° F. The internal battery will gradually self-discharge (lose power) over time, especially in warm environments. -
Page 12: Specifications
SPECIFICATIONS Internal Battery Type Maintenance-free AGM Lead-acid Nominal Voltage 12V DC Capacity 22 Ah DC Power Outlet (Max. Continuous Load) 15A (both outlets combined) Built-in Work Light (Non-replaceable) (2) 5W/12V DC (Base type BA9S) jumper Cables 4-gauge AWG, 24 Inches Dimensions (H x W x D) 12 H x 11.5 x 10.5 Inches Product Weight...
Need help?
Do you have a question about the Portable Power 1150 and is the answer not in the manual?
Questions and answers
Can a on line purchaser replace the internal battery. Seems my unit will not take a charge, it's old and sitting idle for some time.
Yes, the internal battery of a DieHard Portable Power 1150 can be replaced by an online purchaser. The battery is available for purchase as a UB12220 Universal Sealed Lead Acid Battery (12V, 22Ah, 22000mAh, T4 Terminal, AGM, SLA). Customers have reported replacing the battery with moderate difficulty using proper tools.
This answer is automatically generated