Installing And Removing The Intel; Remote Management Module 4; Installing The Intel Rmm4 Lite; Install The Intel Rmm4 Nic - Intel S2600CP Service Manual

Hardware Installations and Upgrades

Installing and Removing the Intel

Module 4
Installing the Intel
Locate the RMM4 Lite connector next to RISER SLOT_1, carefully pickup the Intel
module, match the alignment pin of the module and the connector on server board, then press to
install.
Install the Intel
1. Push out and remove the metal cover on the chassis where the NIC RJ-45 receptacle will align
(see letter "B").
2. Connect the cable to the module (see letter "C").
3. Secure the module to the cahsssi with the two screws (see letter "D").
38

Figure 59. Removing the Intel

®
RMM4 Lite

Figure 60. Installing the Intel

®
RMM4 NIC
®
Intel Server Board S2600CP Intel
®

RAID C600 Upgrade Key

®
Remote Management
®
RMM4 Lite
®
Server System P4000CP Family Service Guide
®
RMM4 Lite