Using the magnify feature
1.
Press the ON button of MAGNIFY on the remote control.
The "MAGNIFY" indication will appear on the screen and
the projector will go into the MAGNIFY mode. In the Magnify
mode, the picture will be zoomed. The indication will
disappear in several seconds with no operation.
2.
Use the ▲/▼ cursor buttons to adjust the zoom level. To move the zoom
area, press the POSITION button in the MAGNIFY mode, then use the
▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area,
press the POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the
OFF button of MAGNIFY on the remote control.
● The projector automatically exits from the MAGNIFY mode when the input
signal is changed or when the display condition is changed.
● In the MAGNIFY mode, the keystone distortion condition may vary, it will be
restored when the projector exits from the MAGNIFY mode.
NOTE
• The zoom level can be finely adjusted. Watch the screen closely to
find the level you want.
Temporarily freezing the screen
1.
Press the FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen (however,
the indication will not appear when OFF is selected for the
MESSAGE item in the SCREEN menu (45)), and the
projector will go into the FREEZE mode, which the picture is
frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
● If the projector projects a still image for a long time, the LCD panel might burn
in. Do not leave the projector in the FREEZE mode for too long.
ENTER
Operating
FREEZE
MENU
SHUTTER
RESET
ASPECT
PbyP
AUTO
POSITION
MY BUTTON
MAGNIFY
1
3
ON
2
4
OFF
KEYSTONE
FOCUS
ZOOM
+
+
LENS SHIFT
-
-
LASER
INDICATOR
STANDBY/ON
MY SOURCE
COMPUTER
VIDEO
ID 1
ID 3
DIGITAL
ID 2
ID 4
BLANK
LASER
ENTER
FREEZE
MENU
SHUTTER
RESET
ASPECT
PbyP
AUTO
POSITION
MY BUTTON
MAGNIFY
1
3
ON
2
4
OFF
KEYSTONE
FOCUS
ZOOM
+
+
LENS SHIFT
-
-
25
Need help?
Do you have a question about the IN5542 and is the answer not in the manual?
Questions and answers