HP Guardian Errors Manual page 191

Effect Information is successfully returned.
Recovery None required.
7 PROCESS IS UNNAMED
Cause The process is not a named process.
Effect No information is returned because the process is unnamed. The process can be the caller.
Recovery No recovery action is required. Call PROCESS_GETINFO_ or PROCESS_GETINFOLIST_
to obtain the process descriptor.
8 SEARCH IS COMPLETE
Cause The search has finished.
Effect No information is returned. The search finished and no more information was found.
Information is returned only if search by index was specified.
Recovery None required.
9 PROCESS DOES NOT EXIST
Cause The specified process does not exist, or the name refers to a device or volume instead of a
process.
Effect No information is returned.
Recovery None required.
10 UNABLE TO COMMUNICATE WITH NODE
Cause The process could not communicate with the node named, possibly because the node did
not exist or was inoperable.
Effect The procedure sets the error code and returns.
Recovery Select another node, then try again.
11 TARGET IS A PROCESS CONTROLLING A DEVICE OR VOLUME, BUT BIT 15 WAS NOT SET
Cause The target process was an IOP and bit 15 of the options parameter was not set.
Effect No information is returned.
Recovery Change the application to accept information about IOPs by changing the options
parameter, or skip to the next processing step if the you do not want the application to process
information about IOPs.
13 LIMITED INFORMATION IS RETURNED FOR A PROCESS THAT IS NOT STARTED
Cause The target named process has not been started.
Effect Limited information is returned. Returned process handles are null (- 1 in each word).
Recovery None required.
Error Codes 191