3. FAULTY DISPENSER
PROBLEM
a) Storage Bin
[1] No ice is
dispensed.
b) Agitator
c) Solenoid
d) Ice Switch or Dis-
pensing Switch
e) Ice Dispensing
Relay
a) Water Valve (Dis-
[2] No water is
dispensed.
pensing)
b) Water Dispensing
Switch
[3] Ice keeps
a) Shutter
being dis-
pensed.
b) Ice Switch
Dispensing Switch
POSSIBLE CAUSE
1) Ice block or bridge
1) Deformed due to ice block
or bridge.
1) Coil winding opened.
1) Bad contacts.
1) Bad contacts.
1) Clogged Filter.
1) Bad contacts.
1) Faulty adjustment.
1) Contacts fused.
24
REMEDY
1) Remove all ice from
Storage Bin when not
using ice dispenser for a
long time.
1) Replace.
1) Replace.
1) Check for continuity and
replace.
1) Check for continuity and
replace.
1) Clean.
1) Check for continuity and
replace.
1) With Shutter closed, lock
Shutter in place by
securing with two screws
at the lower part of
Solenoid and two screws
under Solenoid.
1) Replace.
Need help?
Do you have a question about the DCM-270BAH and is the answer not in the manual?
Questions and answers