Honeywell FocusPRO TH6320WF Wi-Fi Series User Manual page 36
Hide thumbs
Also See for FocusPRO TH6320WF Wi-Fi Series:
- Installation manual (37 pages) ,
- User manual (46 pages) ,
- User manual (70 pages)
Table of Contents
Advertisement
Available languages
Available languages
Frequently asked questions
Q Where can I find my MAC ID and MAC CRC codes?
:
: A The MAC ID and MAC CRC numbers are included on a card packed with the thermostat or on the
back of the thermostat (visible when removed from wallplate). Each thermostat has a unique MAC
ID and MAC CRC.
Q My thermostat is unable to register to the Total Connect Comfort website.
:
: A Verify that the thermostat is correctly enrolled on your home Wi-Fi network. You might also see
the Wi-Fi Signal strength icon. Verify that the Wi-Fi router has a good internet connection. On your
computer, verify that
you can open the site at mytotalconnectcomfort.com
If you cannot open the site, switch off the internet modem for a few seconds, then power it
back on.
Q I registered on the Total Connect Comfort website but was unable to login using my new
:
account.
: A Check your email and ensure that you received an activation email. Follow the instructions to
activate your account and then login to the website.
69-2736EFS—03
34
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the FocusPRO TH6320WF Wi-Fi Series and is the answer not in the manual?
Questions and answers
how do u change the default settings
To change the default settings on the Honeywell FocusPRO TH6320WF Wi-Fi Series thermostat, you need to access the system configuration:
1. Enter System Configuration: Refer to page 29 of the manual to access the system configuration menu.
2. Adjust Specific Settings: Use the configuration codes (e.g., code 38) to modify the desired settings, as detailed on page 32 of the manual.
For example, to disable Wi-Fi setup, change configuration code 38 to "0". To re-enable Wi-Fi later, change it back to "1".
Follow the manual instructions carefully to ensure the settings are updated correctly.
This answer is automatically generated
when u hit the Em heat button what does it do to the heater