Technical Specifications - Plawa CINEMAN 7x User Manual

OTHERS

TECHNICAL SPECIFICATIONS

Laser
Video system
Frequency response
Signal/noise ratio
Audio distortion + noise
Channel separation
Dynamic range
Output
Audio out (analog)
Audio out (digital)
Video
Power supply
Allowable motion temperature
Leistungsaufnahme
Dimensions
Weight
This manual is only for your reference, any change to the design and specifications
will not be advised.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection tech-
nology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
plawa, plawa digitations and CINEMAN
technik GmbH & Co. KG. All other products are trademarks or registered trademarks of
their respective company. Product design and technical features can be changed without
notice. Imported to the EU-Community by plawa-feinwerktechnik GmbH & Co. KG.
Wavelength 650nm
PAL/MULTI/NTSC
20Hz - 20KHz ± 1dB
95 dB
80 (1KHz)
85dB
85dB
Output level: 2V ± 10%
Load impedance: 10k
Output level: 0.5Vp - p
Output level: 1Vp - p ± 20%
Load impedance: 75 , imbalane,
negative polarity
DC 9V, 2A
5 - 36° C
20W
190 x 142 x 37 mm
Around 800g
TM
are registered trademarks of plawa-feinwerk-
39