Pioneer RM-V2550 Manual page 21

No. Name
1 ABL linking switch
2 Linked input terminal
3 Linked output terminal
4 Remote control connector
5 RS-232C port
6 Control input terminal
7 Y (brightness)
input terminal
8 C (color) input terminal
9 Video input terminal
0 Video output terminal
- Terminating switch
= Input selector switch
~ POWER switch
! STATUS indicator switch
@ RGB input terminal
# RBG input selector switch
$ RGB input terminal
(vertical synchronization)
% RGB input terminal
(horizontal synchronization
/composite synchronization)
^ RGB input terminal (B)
& RBG input terminal
(G/G on Sync)
* RBG input terminal (R)
¶ Turn the power off with the POWER switch ~ on the set, through RS-232C control or with the wired remote
control unit (sold separately). (If the power supply is interrupted with the main power switch or if the power
cable is disconnected from the outlet, the switch settings in ! above, the TV system and the convergence
memory settings will not be stored in the last memory.)
Thus, for permanent installations, to start up and stop the entire system by turning the AC power on and off,
the power must first be turned off as described above in order to store the settings in the last memory.
(Refer to "Chapter 4, 2 (5) Last memory of adjustment data and settings ".)
* Total power on time
Only counted when power is set to ON.
Type
Slide switch When ABL linking is on, the ABL linking control
voltage's control quantity can be switched
DIN 6-pin ABL, remote control signal and RS-232C signal input
terminal
DIN 6-pin ABL, remote control signal and RS-232C signal output
terminal
Mini jack Jack for connecting adjustment remote control unit
(sold separately)
D-sub 25-pin RS-232C communications connector
(female)
BNC connector Video input and Y/C input external switching control
signal input terminal
BNC connector Brightness signal input terminal
BNC connector Color signal input terminal
BNC connector Video signal input terminal
BNC connector Video input terminal 9 through out terminal
Slide switch Turn on to terminate video input terminal 9 at 75 ohm
Tact switch Video input, Y/C input, RGB input selector switch.
At the VIDEO position, switching between the video
input and Y/C input is possible with the external control
signal 6.
Tact switch When power off: STANDBY (red LED) lights
When power on: ON (green LED) lights
Tact switch Switch for displaying the total power on time (*), switch
settings, etc., on the screen
D-sub 9-pin (male) RGB signal input terminal
Slide switch Switch for selecting the RGB signal input terminal
format
BNC connector RGB signal vertical synchronization input terminal
BNC connector RGB signal horizontal synchronization and composite
synchronization (for only input signal H/V synchronization)
input terminal
BNC connector RGB signal B input terminal
BNC connector RGB signal G or G on Sync input terminal
BNC connector RGB signal R input terminal
GENERAL SPECIFICATIONS
Function
11