Adding Channels To The Tv/Dvd's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 20HLV86 Owner's Manual

÷
÷
Adding channels to the TV/DVD's memory
When you press CH ^ / v, your TV/DVD will stop only on the
channels you have stored in the TV/DVD'e channel memory. Follow the
steps below to program channels into the channel memory.
Programming channels automatically
Your TV/DVD can automatically detect all active channels and store
them in its memory. After the TV/DVD has stored the channels in its
memory automatically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press _ or I_ to display the SETUP menu.
2. Press A or V until the TV/CABLE
selection is highlighted.
3. Press 4 or l_ to highlight either .....
LANGUAGE ENGLISH
TV or CABLE, depending on .................
ca PROGRAM _"
which you use. ,A . ..........
If you use an antenna, choose TV. ,__ ......... _.......
If you use cable, choose CABLE.
4. Press V until the CH PROGRAM selection is highlighted.
5. Press _1or l_"to start channel programming. The TV/DVD will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV/DVD is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH ^ / v to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase. If adding channels, you
must select the channel to add using the Channel Number buttons.
2. Press MENU, then press _11 o r I_ to display the SETUP menu.
3. Press A or V to highlight ADD/
ERASE.
4. Press _1or _ to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other channels
you want to add or erase.
LANGUAGE ENGLISH
CLOCK SET 12:0CAM
TV / CABLE CABLE
CH PROGRAM
,_ SELECT ,_,:ADaUS_"
Changing channels
To change to the next programmed channel:
Press Channel ^ / v on the TV/DVD or CH ^ / v on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
Game mode
After connecting a TV Game to the unit, press GAME. The TV screen
changes to the Game mode.
. The Game mode screen is adjusted to the suitable brightness for
your eyes.
• If GAME is pressed during standby mode, the unit turns on
automatically and the Game mode screen appears on the screen.
Channel
Numbers
Channel ^ v
AV_
Menu
i i¸i¸i¸i¸i¸i¸i¸i¸ iiiiiiiiiiiiiii!i!i!i
__ LJ
Game
In addition to cycling through your
programmed channels, the Channel ,,,,/v
buttons will also cycle through the video
input sources (page 31) in the order
illustrated below.
ANT (programmed channel) _ VIDEO1 _ VIDEO2
PC _ HDMI "e---->ColorStream HD <-"""">GAME
÷
24
5X20321A(E)P22-25 24 _ 7/3/06, 12:25 PM