Table of Contents
Advertisement
Setting
RGB3 ADJ.
When the picture input from the RGB3 input terminal is
distorted, select the most appropriate setting from among
"1", "2", and "3".
Example: Setting "2"
Press
the PROCEED
button
on the remote
control
to
display MAIN
MENU on the screen,
then...
i. Use the •
and • buttons
to select "FUNCTION",
then press the PROCEED
button.
The "FUNCTION"
screen appears.
2. Use the • and • buttons
to select "RGB3 ADJ,".
Reducing
burn-in
of the screen
The brightness of the screen, the position of the picture,
positive/negative
mode and screen wiper are adjusted to
reduce burn-in of the screen.
Example: Setting "PLE" to "LOCK"
Press
the PROCEED
button
on the remote
conttv_l to
display
the MAIN MENU
on the screen, then proceed
as
f!_llows.
i. Use the • and • buttons
to select "FUNCTION",
then
press the PROCEED
button,
The "FUNCTION"
screen appears,
2. Use the • and • buttons
to select "LONG
LIFE", then
press 1he PROCEED
button.
3. To select
"2 "...
Use the _l and • buttons
to select "2".
The mode switches
as follows
each time the _l or •
buton is pressed:
4. Once the setting
is completed...
Press the EXIT button
to return to the main menu,
To delete the main menu, press the EXIT button once
more,
Jfnfo='matien
• When you adjust the RGB3 ADJ.
The position of the menu display will change. In such
a case, be sure to adjust the position,
• Restoring the factory default settings
Select "RESET" under the function menu. Note that
dais also restores other settings to the factory defaults.
The "LONG LIFE" screen appears.
3. Use the • and • buttons to select "PLE".
4. Use the _l and • buttons
to select "LOCK".
The mode switches
as follows
each time the _l or •
button
is pressed:
AUTO<-_LOCK
32
Advertisement
Table of Contents
