Adjusting The Picture Quality; Watching Video Input; Specifying The Colorstream ® Setting; Displaying On-Screen Information - Toshiba FSTPURE COLORSTREAM 20AF46 Owner's Manual

÷
÷
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, tint, and sharpness. The
qualities you choose will be stored automatically in your TV's memory
so you can recall them at any time.
To adjust the picture quality:
1. Press MENU, then press { or )" to display the PICTURE menu.
CONTRAST m64
BRIGHTNESS _32
COLOR _32
TINT _ 0
SHARPNESS _32
SELECT AV ADJUST 4 •
2. Press A or V until the item you want to adjust is highlighted.
3. Press { or )" to adjust the level.
contrast lower higher
brightness darker lighter
color paler deeper
tint reddish greenish
sharpness softer sharper
4. Press EXIT to return to normal viewing.
Watching video input
You can use the TVNIDEO button on the remote control to view a
signal coming from other devices, such as VCRs or video disc players
that may be connected to your TV. (See "Connecting your TV" on page 7.)
Specifying the ColorStream e setting
You can use the ColorStream (component video) input for connecting
either a DVD player or a DTV receiver.
Note: This TV is not HD ready.
1. Press TVNIDEO to put the TV in
ColorStream mode.
2. Press MENU, then press { or ]_ until
the OPTION menu appears.
3. Press A or v to highlight
COLORSTREAM.
4. Press { or )" to highlight DVD or
DTV, depending on which device is
connected.
5. Press EXIT to return to normal viewing.
,_;) []
IP,cTOJ AU0,OIsE,0
LANGUAGE ENGLISH
CH LABEL START _"
FAVORITE CH START _"
V-CHIP START _"
LOCK START I,.
ON/OFFTIMER OFF
_DVD DTV
SELECT ,6. V ADJUST _1 •
Note: The factory setting is DVD.
Displaying on-screen information
Press RECALL to display the following
on-screen information:
• Clock
• Channel number or VIDEO mode
selected
• Channel label (if preset)
• Stereo or SAP (second audio program)
audio status
• Content rating
(TV)
12:00 AM CABLE 007
STEREO ABCD
SAP
MPAA
X
24
Av
,().
Exit
Reset
Note:
To reset the picture adjustments to the factory
settings, press RESET
To select the input mode:
Press the TVNIDEO button repeatedly to
select the desired mode. The signal source
you are connected to is displayed in light blue.
TV _ VIDEO 1 _ VIDEO 2
t COLOR
STREAM
Exit
Menu
÷
J3S10321A(E) P14-25 24 _ 21/12/05, 12:35 PM