Adjusting The Wash Settings - Fisher & Paykel INTUITIVE IWL12 Installation Instructions And User Manual
Autowasher
Hide thumbs
Also See for INTUITIVE IWL12:
- Installation instructions and user manual (80 pages) ,
- Service manual (41 pages) ,
- Service summary (4 pages)
Table of Contents
Advertisement
Adjusting the Wash Settings
After using your Intuitive™ washer you may want to fine-tune some of the options to suit your
wash needs. Anything changed in this menu is a permanent change, unless 'Reset Defaults' is
selected, see page 20.
To Access the Adjust Settings Menu:
Push the OPTIONS UP or OPTIONS DOWN button,
■
and hold down for 2 seconds. The Adjust Options
Menu will then be displayed.
Scroll through the screens until the option you
■
wish to adjust is shown. Press options UP or DOWN
to scroll.
Press ADJUST to highlight the option you want.
■
This option will be permanently set. To unset the
option repeat above steps.
S1 Wash Temp Adjust = Temperature of Wash Water
The wash temperatures can be adjusted if you think they are too hot or too cold.
Access the Adjust Settings Menu (refer above).
■
Scroll to the TEMPERATURE ADJUSTMENT screen.
■
Use the ADJUST button to move the cursor through the boxes to decrease or increase the
■
wash temperature (The numbers in the boxes are in degrees). Each movement is approximately
2˚C. Press HOME once the box with the number of degrees you want to change the wash
temperature to is highlighted.
S2 Auto Water Level Adjustment
If you are not satisfied with the water level that your Intuitive™ washer fills to on auto water level,
you can increase or decrease the fill level that auto will select.
Access the Adjust Settings Menu (refer above).
■
Scroll to the AUTO WATER LEVEL screen.
■
Use the ADJUST button to move the cursor through the boxes to decrease or increase the fill
■
level. The boxes on the left side of the centre point decrease the fill level and those boxes on the
right increase the fill level. Then press HOME.
Note:
If you feel there is not enough water for the load, we recommend you check by pausing the
machine and pushing the clothes down to see how much spare water is at the bottom of the
bowl. Clothes often float and your washer can sense the water under the clothes.
18
Hold down for 2 seconds
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INTUITIVE IWL12 and is the answer not in the manual?
Questions and answers
how do I set the size [medium] on my I/W 712
The size of the Fisher & Paykel INTUITIVE IWL12 washer is not manually set. To determine the size of your washer, check the back of the top deck where "Large," "Medium," or "Compact" will be embossed. The Compact Intuitive™ model functions the same as Medium and Large Intuitive Eco™ models unless otherwise indicated.
This answer is automatically generated
yes how do i set the size of the m/c.
The Fisher & Paykel INTUITIVE IWL12 washing machine automatically adjusts the water level and wash action based on the load size. There is no need to manually set the load size. Simply place the load evenly around the agitator, and the machine's intelligent electronics will determine the appropriate water level and wash action.
This answer is automatically generated