Oven Heating Elements; Light - GE Quick Set V Owner's Manual

GEAppliances.com
j t-IOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so may result
in electric shock or burn.
Oven Light Replacement (on some models)
Be sure to let the light cover and bulb cool
completely.
To remove the cover:
[Z] Twist lens counterclockwise about a
quarter turn to remove.
Do not remove any screws to remove the cover.
[_ Replacebulb with a 40-watt appliance
bulb or two-prong halogen bulb, as
appropriate.
To replace the cover:
[-_ Line up tabs of lens in front of tabs on
housing and rotate clockwise to engage.
/, ........................
Oven Heating Elements (on some models)
Do not clean the bake element or the broil
element.Any soil will bum off when the
elements are heated.
To clean the oven floor, gently lift the bake
element. Clean with warm, soapy water.
Wipe up heavy soil on the oven
bottom.
Oven Heating Elements (on some models)
Do not clean the broil element. Any soil will burn
off when the element is heated. Clean the oven
floor with warm, soapy water.
On some models,the bake element is not
exposed and is under the oven floor. If spillovers,
residue or ash accumulate on the oven floor,
wipe up before self-cleaning.
If the element is above the oven floor, gently lift
the bake element and clean with warm, soapy
water.
41