Hood Lights - GE Appliances JV936 Owner's Manual And Installation Instructions

GEAppliances.com
Be sure electricalpower is off and all surfaces are cool before cleaningor-servicingany part of the vent hood.
Receptacle Socket
X Bulb
/
Glass cover
Hood Lights
NOTE: The gloss cover should be removed
only when cold. Wearing latex gloves may
offer o better grip.
CAUTION: efore replacing your
light bulb, disconnect the electrical power to
the hood at the main fuse or circuit breaker
panel.
Be sure to let the light cover and bulb cool
completely.
Foryour safety, do not touch a hot bulb with
bare hands or a damp cloth.
To remove:
r_ Turn the glass cover counterclockwise until
the glass cover clears the socket.
r_ using gloves or a dry cloth, remove the
bulb by pulling it straight out.
To replace:
[Z] Use a new 12-volt, 20-watt (maximum)
Halogen bulb for a G-4 base.
[] Using gloves or a dry cloth, remove the
new bulb from its packaging.
NOTE:Do not touch the new halogen bulb
with bare fingers. Touching the bulb with
bare fingers will significantly reduce the life
of the bulb.
Re_ade
or cloth __ "_-
r_ Pushthe bulb straight into the receptacle
all the way.
r_ Placethe glass cover onto the socket and
turn clockwise until secure.
For improved lighting, clean the glass cover
frequently using a damp cloth. This should
be done when the hood is completely cool.
rs] Reconnect electrical power to the hood.