GE Appliances Disposall GFC320 Owner's Manual And Installation Instructions page 7

Installation Instructions
CONNECTING DISPOSER TO SINK FLANGE
%
ATTACH TO SINK FLANGE
Line up the disposer
under the sink flange.
Guide the hopper
Mount
prqjections into the
RingSlot
mount ring slots. Turn Hopper
tlle mount ring about
Projection
1/4" to the right so
that tile disposer is
temporarily supported.
[] LINE UP WITH OUTLET PIPE
Turn tile mount ring and tlle disposer until tlle
disposer discharge elbow lines up with tile outlet
pipe (see page 8).
Discharge
Elbow
OutletPipe/1
I_ LOCK MOUNT RING
Turn tlle mount ring slowly to tile right until it
locks up tight. Hopper projections must be to the
extreme left of the mounting slots. If tlle mount
ring is hard to turn, you may add a small amount
of petroleum jelly or liquid soap to the hopper
projection. Run water and check for leaks.
LockingDetail
HopperProjectionin
"Supported"Position
HopperProjection Mount
in "Locked"Position Mounting Slot Ring
[]
CHECK FOR LEAKS
Gheck tile unit for leaks 24 hours after installation
and first operation.
7