Page 1
Manufactured under license from Lyngdorf Audio A/S. ROOMPERFECT is a registered trademark and the ROOMPERFECT logo is a trademark of Lyn- gdorf Audio A/S. (C) Lyngdorf Audio A/S 2009. McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com...
Page 2
The following connection instructions and illustra- outputs and two unbalanced outputs. These Auxiliary tion on the next page are a supplement to the MX150 Outputs (1 thru 4) may be used for additional sub- Zone A Output Connection instructions on page 11 woofer outputs or for using the MX150 built-in elec- of the Owner’s Manual and the separate folded sheet...
Page 3
MX150 Auxiliary Output Guide Note: Refer to the MX150 Owner’s Manual pages 10 and 11 for additional Zone A - Power Amplifier One connection information. High Frequencies Left Front and Right Front Channels; Center Channel Connection Legend: Power Control Cable* -...
Electronic Crossover Circuitry, the settings in the staller Menu. Then select “Speaker Configuration” 4. Also refer to page 22 of the MX150 Owner’s from the Speaker and Room Setup Menu. Refer to Manual for additional information on the “XL”...
Page 5
Advanced Setup and Operation Guide 500Hz. In such a case the MX150 would set Select Perf. AUX1/AUX2 (L/R) the crossover point for both the Low and High AUX perform Custom Frequency Outputs to 125Hz. 2. When using both AUX1/2 (Balanced Outputs)
Page 6
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 www.mcintoshlabs.com The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. Printed in the U.S.A. McIntosh Part No. 04130700...
Need help?
Do you have a question about the MX150 and is the answer not in the manual?
Questions and answers