Table 1: Vs-88H 8X8 Hdmi Matrix Switcher Front Panel Features - Kramer VS-88H User Manual

8x8 hdmi matrix switcher
Hide thumbs Also See for VS-88H:
Table of Contents

Advertisement

Table 1: VS-88H 8x8 HDMI Matrix Switcher Front Panel Features

#
Feature
1
IR Receiver
2
POWER LED
3
ALL Button
4
OFF Button
5
SELECT
IN
2
Buttons
6
OUT
7
STO Button
8
RCL Button
9
LOCK Button
10
EDID Button
11
OUTPUT/ INPUT
7-segment LCD Display
12
IN HDMI Connectors
13
OUT HDMI Connectors
14
RS-232 9-pin D-sub Port
15
ETHERNET Connector
16
ETH RESET Button
17
Power Connector with Fuse AC connector enabling power supply to the unit
18
Power Switch
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
2 Are also used for storing machine setups (see section 7.3)
3 The input/output routing configuration is saved/recalled
4 First turn the VS-88H OFF and then turn it ON again while pressing the RESET button. The unit will power up and load its
memory with the factory default definitions
Your VS-88H 8x8 HDMI Matrix Switcher
The yellow LED lights when receiving signals from the Infrared remote
control transmitter
Illuminates when the unit is turned ON
Pressing ALL before pressing an input button, connects that input to
1
all outputs
Pressing OFF after pressing an output button disconnects that output
from the inputs. To disconnect all the outputs, press the ALL button and
then the OFF button
Select the input to switch to the output (from 1 to 8)
Select the output to which the input is switched (from 1 to 8)
Press to store the current settings
Press to recall the current settings
Press and hold to toggle disengaging the front panel buttons and to
acquire the EDID
Press EDID to capture the EDID (see section 7.2)
Displays the selected input switched to the output (marked above
each input)
Connect to the HDMI sources (from 1 to 8)
Connect to the HDMI acceptors (from 1 to 8)
Connects to the PC or other RS-232 Remote Controller
Connects to the PC or other Ethernet Controller
Press the ETHERNET factory reset button to reset to the factory default
4
definitions
:
IP number − 192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
Illuminated switch for turning the unit ON or OFF
Function
3
(see section
7.3
)
3
(see section 7.3)
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VS-88H and is the answer not in the manual?

Questions and answers

Table of Contents