Anti-Tip Bracket Installation - KitchenAid GAS RANGE Installation Instructions Manual

Plug power
supply cord
into grounded
outlet
Make proper
gas connection
Install anti-
tip bracket
Level range
Replace or close
broiler door
Preparation
Injury Hazard
Because of the weight and size of this
range, two or more people are required to
move it.
Do Not use handle for lifting.
Failure to follow these instructions could
result in injury.
I
n
Put on safety glasses and gloves. Do Not
use oven door handle to lift or move the range.
2
n
Remove oven racks and parts package
from inside oven. Remove shipping materials,
n
Keep cardboard
tape and protective film from range.
range to prevent damage to floor covering.
Anti-tip bracket installation
Contact a qualified floor covering installer for
the best procedure for drilling mounting
holes through your type floor covering.
m4
! A'
n
Use the anti-tip bracket
Electrical Shock
Injury Hazard
template/instruction sheet to install the
Take special care when drilling
To reduce the risk of tipping of the
anti-tip bracket.
holes in the floor or wall. Electrical
Anti-tip bracket must be
wires may be behind the wall or
range, the range must be secured
by a properly installed floor-
anchored securely to the sub
floor covering and could cause an
mounted anti-tip bracket, supplied
floor.
electrical shock if you touch them.
with the range.
Depending on the thicknes
Locate the electrical circuits that
Save these Installation Instructions.
of your flooring, longer scr
could be affected by the installation
of the anti-tip bracket and turn off
If the range is moved to a new
may be needed to
location, the anti-tip bracket must
anchor the bracket
power to these circuits.
be removed and reinstalled in the
to the sub floor.
Failure to follow these instructions
new location.
Longer screws ar
could result in death or serious
Failure to follow these instructions
available from
injury.
could result in injury.
your local
hardware store.
Page 3