Primary Belt Replacement - Honda HT-R3009 Owner's Manual

9. Primary belt replacement
1. Remove the cutter deck (see p. 44-45).
2. Remove the primary belt from the pulley on the belt tensioner arm while
pressing out on the arm by hand. Remove the primary belt from the
pulley on the engine.
3. Remove the tensioner arrh by removing the IO mm bolt and remove the
primary belt by pulling it out by hand.
4. Install a new primary belt. Install the remaining parts in the reverse order
of removal.
PUl .LEY (Engine side)
cy BELT
TENSIONER ARM
ARM
10 mm FLANGE BOLT
49