Ferris 5900624 Operator's Manual
  1. Manuals
  2. Brands
  3. Ferris Manuals
  4. Lawn Mower
  5. 5900624
  6. Operator's manual

Ferris 5900624 Operator's Manual

Is2000z series zero-turn riding mower
Hide thumbs Also See for 5900624:
Table of Contents

Advertisement

Quick Links

Model Number:
5900619
5901170
5900624
5900625
5900629
Ferris Industries
5375 North Main Street
Munnsville, NY 13409
800-933-6175
OPERATOR'S
MANUAL
IS2000Z Series
Zero-Turn Riding Mower
Description
IS2000ZKAV2561, 25HP, 61" Cut Zero-Turn Riding Mower
IS2000ZK2761, 27HP, 61" Cut Zero-Turn Riding Mower
IS2000ZKAV2552, 25HP, 52" Cut Zero-Turn Riding Mower
IS2000ZK2752, 27HP, 52" Cut Zero-Turn Riding Mower
IS2000ZLKAV2661, 26HP, 61" Cut Zero-Turn Riding Mower
5100758
Revision 01
Rev. Date: 9/2006
TP 100-7299-01-2Z-F

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5900624 and is the answer not in the manual?

Questions and answers

Related Manuals for Ferris 5900624

Summary of Contents for Ferris 5900624

  • Page 1 Model Number: 5900619 5901170 5900624 5900625 5900629 Ferris Industries 5375 North Main Street Munnsville, NY 13409 800-933-6175 OPERATOR’S MANUAL IS2000Z Series Zero-Turn Riding Mower Description IS2000ZKAV2561, 25HP, 61” Cut Zero-Turn Riding Mower IS2000ZK2761, 27HP, 61” Cut Zero-Turn Riding Mower IS2000ZKAV2552, 25HP, 52” Cut Zero-Turn Riding Mower IS2000ZK2752, 27HP, 52”...
  • Page 2 Copyright © 2006 Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved. The Ferris logo is a trademark of Briggs & Stratton Corporation Milwaukee, WI, USA. Contact Information: Ferris Industries. 5375 N. Main St. Munnsville, NY 13409-4003 (800) 933-6175 www.ferrisindustries.com...

  • Page 3: Table Of Contents

    Table of Contents Safety Rules & Information ...2 Identification Numbers ...11 Safety Decals ...12 Safety Interlock System...13 Features & Controls ...14 Control Functions...14 Control Functions - Liquid Cooled Model ...16 Operation ...18 General ...18 Checks Before Starting ...18 Starting the Engine ...19 Stopping the Rider ...19 Pushing the Rider by Hand...19 Zero Turn Driving Practice ...20...

  • Page 4: Safety Rules & Information

    Safety Rules & Information Read the Manual The operator’s manual contains important safety information you need to be aware of BEFORE you operate your unit as well as DURING operation. Safe operating techniques, an explanation of the product’s features and controls, and maintenance information is included to help you get the most out of your equipment investment.

  • Page 5: Slope Operation

    Thrown Objects This unit has spinning mower blades. These blades can pick up and throw debris that could seriously injure a bystander. Be sure to clean up the area to be mowed and remove objects that could be thrown by the blade BEFORE you start mowing.
  • Page 6 Safety Rules & Information Retaining Walls, Drop- offs, and Water Retaining walls and drop-offs around steps and water are a common hazard. Give yourself a minimum of two mower widths of clearance around these hazards and hand-trim with a walk behind mower or string trimmer.
  • Page 7 Enclosed Areas Only operate this unit outdoors and away from unventilated areas such as inside garages or enclosed trailers. The engine emits poisonous carbon monoxide gas and prolonged exposure in an enclosed area can result in serious injury or death. Safety Rules &...

  • Page 8: Operation

    Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed.
  • Page 9 23. Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision. 24. To reduce fire hazard, keep unit free of grass, leaves & excess oil. Do not stop or park over dry leaves, grass or combustible materials. 25.

  • Page 10: Service And Maintenance

    Safety Rules & Information SERVICE AND MAINTENANCE To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Safe Handling of Gasoline 1. Extinguish all cigarettes, cigars, pipes, and other sources of ignition.
  • Page 11 27. Models equipped with an engine radiator: WARNING: Stored energy device. To prevent serious bodily injury from hot coolant or steam blow-out, never attempt to remove the radiator cap while the engine is running. Stop the engine and wait until it is cool. Even then, use extreme care when removing the cap.
  • Page 12 Safety Rules & Information WARNING Failure to properly inspect and maintain the seat belt can cause serious injury or death. INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT • The seat belt like the ROLL BAR, needs to be periodically inspected to verify that the integrity has not been compromised through normal machine use, misuse, age degradation,...

  • Page 13: Identification Numbers

    Identification Numbers Identification Numbers Identification When contacting your authorized dealer for replacement parts, service, or information you MUST have these numbers. Record your part number, serial number and engine serial numbers in the space provided for easy access. These numbers can be found in the locations shown. NOTE: For location of engine identification numbers, refer to the engine owner’s manual.

  • Page 14: Safety Decals

    Safety Decals SAFETY DECALS This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing. Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important...

  • Page 15: Safety Interlock System

    SAFETY INTERLOCK SYSTEM This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly. Operational SAFETY Checks Test 1 — Engine should NOT crank if: •...

  • Page 16: Features & Controls

    Features & Controls AIR COOLED MODELS ONLY CONTROL FUNCTIONS The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Ground Speed Levers These levers control the ground speed of the rider.
  • Page 17 Parking Brake DISENGAGE Releases the parking brake. ENGAGE Locks the parking brake. Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged. PTO (Power Take Off) Switch The PTO switch engages and disengages the mower.

  • Page 18: Control Functions - Liquid Cooled Model

    Features & Controls LIQUID COOLED MODELS ONLY CONTROL FUNCTIONS The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Ground Speed Levers These levers control the ground speed of the rider.
  • Page 19 Parking Brake DISENGAGE Releases the parking brake. ENGAGE Locks the parking brake. Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged. PTO (Power Take Off) Switch The PTO switch engages and disengages the mower.

  • Page 20: Operation

    Operation GENERAL OPERATING SAFETY Before first time operation: • Be sure to read all information in the Safety and Operation sections before attempting to operate this tractor and mower. • Become familiar with all of the controls and how to stop the unit.

  • Page 21: Starting The Engine

    WARNING If you do not understand how a specific control functions, or have not yet thoroughly read the FEATURES & CONTROLS section, do so now. Do NOT attempt to operate the tractor without first becoming familiar with the location and function of ALL controls.

  • Page 22: Zero Turn Driving Practice

    Operation ZERO TURN DRIVING PRACTICE The lever controls of the Zero Turn rider are responsive, and learning to gain a smooth and efficient control of the rider’s forward, reverse, and turning movements will take some practice. Spending some time going through the maneuvers shown and becoming familiar with how the unit accelerates, travels, and steers —...

  • Page 23: Advanced Driving

    Practice Turning Around a Corner While traveling forward allow one handle to gradually return back toward neutral. Repeat several times. NOTE: To prevent pivoting directly on the tire tread, it is best to keep both wheels going at least slightly forward.

  • Page 24: Mowing

    Operation MOWING 1. Engage the parking brake. Make sure the PTO switch is disengaged, the motion control levers are locked in the NEUTRAL position and the operator is on the seat. 2. Start the engine (see STARTING THE ENGINE). 3. Set the mower cutting height. 4.

  • Page 25: Mowing Methods

    When and How Often to Mow The time of day and condition of the grass greatly affect the results you’ll get when mowing. For the best results, follow these guidelines: 1. Mow when the grass is between three and five inches high.

  • Page 26: Attaching A Trailer

    Operation Proper Mulching Mulching consists of a mower deck which cuts and recuts clippings into tiny particles and which then blows them down INTO the lawn. These tiny particles decompose rapidly into by-products your lawn can use. UNDER PROPER CONDITIONS, your mulching mower will virtually eliminate noticeable clippings on the lawn surface.

  • Page 27: Raise & Lower The Roll Bar

    RAISE & LOWER THE ROLL BAR To lower the roll bar: 1. Pull the hair pin clips (A, Figure 13) out of the retainer pins (B). 2. Push or pull the top of the roll bar (C) forward against the rubber stops (D) and remove the retainer pins (B).

  • Page 28: Storage

    Operation STORAGE Temporary Storage (30 Days Or Less) Remember, the fuel tank will still contain some gasoline, so never store the unit indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the unit in any structure used for human or animal habitation.

  • Page 29: Regular Maintenance

    MAINTENANCE SCHEDULE The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of your operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour meter. SAFETY ITEMS Check Safety Interlock System Check Rider Brakes...

  • Page 30: Checking Tire Pressures

    Regular Maintenance CHECK TIRE PRESSURES Tire pressure should be checked periodically, and maintained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

  • Page 31: Check Hydraulic Oil Level

    CHECK HYDRAULIC OIL LEVEL 1. Before removing the reservoir cap, make sure the area around the reservoir cap and fill neck of the reservoir is free of dust, dirt, or other debris. 2. Unscrew the reservoir cap (B, Figure 16). 3.

  • Page 32: Check Engine Coolant Level

    Regular Maintenance CHECK ENGINE COOLANT LEVEL The engine coolant level and quality should be checked before each use, when the engine is cool and off. The cooling system is a closed type. Never open the radiator cap. Doing so may induce air into the cooling system and may cause overheating.

  • Page 33: Lubrication

    LUBRICATION Lubricate the unit at the locations shown in Figures 19 through 23 as well as the following lubrication points. Grease: • front caster wheel axles & yokes • deck lift pivot blocks • mower deck spindles • mower deck idler arm Use grease fittings when present.

  • Page 34: Battery Maintenance

    Regular Maintenance BATTERY MAINTENANCE NOTE: This unit is equipped with a maintenance-free BCIU1 battery. Cleaning the Battery and Cables - Air Cooled Models. 1. Remove the hydraulic oil reservoir mounting hardware (C, Figure 24) and move the reservoir (D) forward to expose the battery. 2.

  • Page 35: Servicing The Mower Blades

    SERVICING THE MOWER BLADES 1. Blades should be sharp and free of nicks and dents. If not, sharpen blades as described in the following steps. 2. To remove blade for sharpening, use a 1” wrench on the flats of the spindle shaft while removing the blade mounting bolt with a 15/16”...

  • Page 36: Troubleshooting, Adjustments & Service

    Troubleshooting, Adjustment & Service TROUBLESHOOTING While normal care and regular maintenance will extend the life of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly. The troubleshooting guide below lists the most common problems, their causes and remedies.

  • Page 37: Troubleshooting The Mower

    RIDER TROUBLESHOOTING CONTINUED. PROBLEM Engine runs, but rider will not drive. Rider drive belt slips. Brake will not hold. Rider steers or handles poorly. TROUBLESHOOTING THE MOWER PROBLEM Mower will not raise. Engine stalls easily with mower engaged. Excessive mower vibration. Excessive belt wear or breakage.

  • Page 38: Troubleshooting Common Cutting Problems

    Troubleshooting, Adjustment & Service TROUBLESHOOTING COMMON CUTTING PROBLEMS PROBLEM Streaking. Scalping. Stepped Cutting. Uneven Cutting. Stingers. CAUSE 1. Blades are not sharp. 2. Blades are worn down to far. 3. Engine speed is too slow. 4. Ground speed is too fast. 5.

  • Page 39: Seat Adjustment

    SEAT ADJUSTMENT See Figure 28. The seat can be adjusted forward and back. Move the lever forward, position the seat as desired, and release the lever to lock the seat into position. GROUND SPEED CONTROL LEVER ADJUSTMENT The control levers can be adjusted in three ways. The alignment of the control levers, the placement of the levers (how close the ends are to one another) and the height of the levers can be adjusted.

  • Page 40: Neutral Adjustment

    Troubleshooting, Adjustment & Service NEUTRAL ADJUSTMENT If the tractor “creeps” while the ground speed control levers are locked in NEUTRAL, then it may be necessary to adjust the linkage rod. NOTE: Perform this adjustment on a hard, level surface such as a concrete floor. 1.

  • Page 41: Parking Brake Adjustment

    PARKING BRAKE ADJUSTMENT 1. Disengage the PTO, engage the parking brake, stop the engine and remove the ignition key. 2. Raise the seat plate. 3. Locate the brake spring (A, Figure 33). 4. With the parking brake engaged, measure the compressed spring length.

  • Page 42: Rear Suspension Adjustment

    Troubleshooting, Adjustment & Service SUSPENSION ADJUSTMENT The shock assembly can be adjusted to vary the amount of pre-load applied to the springs. This allows the operator to maintain the ride height. Use less pre-load for light weight operators. Use more pre-load for heavy weight operators.

  • Page 43: Mowing Height Adjustment

    MOWING HEIGHT ADJUSTMENT The cutting height adjustment pin (A, Figure 35) controls the mower cutting height. The cutting height is adjustable between 1-3/4” (4,4 cm) and 5” (12,7 cm) in 1/4” (0,64 cm) increments. 1. Depress the deck lift foot pedal (B) until it locks into the 5”...

  • Page 44: Deck Lift Rod Timing Adjustment

    Troubleshooting, Adjustment & Service DECK LIFT ROD TIMING ADJUSTMENT 1. Park machine on a flat, level surface. Disengage the PTO, stop the engine and engage the parking brake. Rear tires must be inflated to 18 psi (1,24 bar); front tires to 25 psi (1,72 bar). 2.

  • Page 45: Deck Leveling Adjustment

    DECK LEVELING ADJUSTMENT NOTE: Before adjusting the deck level, the deck lift rod timing must be checked and/or adjusted. 1. Park machine on a flat, level surface. Disengage the PTO, stop the engine and engage the parking brake. Rear tires must be inflated to 15 psi (1,03 bar);...

  • Page 46: Hydraulic Pump Drive Belt Replacement

    Troubleshooting, Adjustment & Service HYDRAULIC PUMP DRIVE BELT REPLACEMENT 1. Park the tractor on a smooth, level surface such as a concrete floor. Disengage the PTO, engage the parking brake, turn off the engine, and remove the ignition key. 2. Remove the PTO drive belt (see MOWER BELT REPLACEMENT for removal instructions).

  • Page 47: Mower Belt Replacement

    MOWER BELT REPLACEMENT To avoid damaging belts, DO NOT PRY BELTS OVER PULLEYS. 1. Park the tractor on a smooth, level surface such as a concrete floor. Disengage the PTO, engage the parking brake, turn off the engine, and remove the ignition key.

  • Page 48: Battery Service

    Troubleshooting, Adjustment & Service BATTERY SERVICE WARNING Keep open flames and sparks away from the battery; the gasses coming from it are highly explosive. Ventilate the battery well during charging. Checking Battery Voltage A voltmeter can be used to determine condition of battery.
  • Page 49 THIS HOOK-UP FOR NEGATIVE GROUND VEHICLES Starter Switch Starting Vehicle Battery To Ground MAKE CERTAIN VEHICLES DO NOT TOUCH Figure 46. Jump Starting WARNING Any procedure other than the preceding could result in: (1) personal injury caused by electrolyte squirting out the battery vents, (2) personal injury or property damage due to battery explosion, (3) damage to the charging system of the...

  • Page 50: Specifications

    Specifications NOTE: Specifications are correct at time of printing and are subject to change without notice. ENGINE: 25 HP Kawasaki Make Kawasaki Model FH721V Horsepower 25 @ 3600 rpm Displacement 41.2 Cu. in (675 cc) Electrical System 12 Volt, 13 amp. Alternator, Battery: 340 Oil Capacity 4.0 US pt.
  • Page 51 Ferris Industries (Ferris) warrants, in accordance with the provisions below, to the original purchaser only, for the periods described below that the commercial mower shall be free from substantial defects in material or workmanship under normal use and service. If you wish to file a claim under this limited warranty, you must provide prompt notice of your claim to an authorized Ferris dealer during the warranty period.
  • Page 52 Tire Size: 22 x 11.00 -10 (61” Deck) Inflation Pressure: 15 psi (1,03 bar) Front Wheels Tire Size: 13 x 5.00 - 6 Inflation Pressure: 25 psi (1,72 bar) Ferris Industries 5375 North Main Street Munnsville, NY 13409 800-933-6175 www.ferrisindustries.com OPERATOR’S...

This manual is also suitable for:

5900619590062559011705900629

Table of Contents

Save PDF