The battery on the Precor RBK 615 is built to last for a long time. If replacement is needed, it should be checked and replaced by an authorized service technician.

This answer is automatically generated

Summary of Contents for Precor RBK 615

Page 1 Product Owner’s Manual RBK 615 • UBK 615...
Page 2 ...
Page 4: Edition Information
Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be. Precor is widely recognized for its innovative, award-winning designs of exercise equipment.
Page 5: Important Safety Instructions
Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit). It is not packaged for individual sale.
Page 6: Safety Precautions
Product Owner's Manual Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety notices.
Page 7 Important Safety Instructions  Care should be taken when mounting or dismounting the equipment. For Treadmills: Do not use typing or web surfing features  while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
Page 8 Product Owner's Manual  SPACING—The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standards and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: Treadmills—a minimum of 0.5 m (19.7 in.) on each ...
Page 9 350 pounds (160 kg). Use the equipment only for its intended purpose as  described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries. Do not operate the equipment where aerosol (spray) ...
Page 10: Educating Users
The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service.
Page 11: Regulatory Notices For The Rfid Module
Important Safety Instructions Regulatory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio-frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between -20°C and 85°C (-4°F and 185°F).
Page 12: European Applications
Product Owner's Manual Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 13: Regulatory Notices For Cardiovascular Exercise Equipment
The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards. Cardiovascular Type Equipment: CAN/CSA, IEC, EN 60335-1 (Household and similar ...
Page 14 Product Owner's Manual Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer European Applications CE compliance is claimed to the following directives: 2004/108/EC EMC Directive ...
Page 15: Electrical Recommendations: All Equipment Excluding Treadmills
Important Safety Instructions Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required.
Page 16: Obtaining Service
Do not attempt to service the equipment except for maintenance tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http://www.precor.com. Obtaining Updated Documentation Current Precor product documentation is available at http://www.precor.com/productmanuals.
Page 17: Table Of Contents
Table of Contents Important Safety Instructions ............ 3 Safety Precautions ................4 Educating Users ..................8 Hazardous Materials and Proper Disposal ........8 Product Recycling and Disposal ............8 Regulatory Notices for the RFID Module ........9 Regulatory Notices for Cardiovascular Exercise Equipment ..................
Page 18 Product Owner's Manual...
Page 19: Product Features
Chapter Product Features This section is designed to show you how to customize the equipment for your users and view useful product information. All these features remain hidden to the users and can only be accessed using special keypresses. These custom settings allow you to ...
Page 20 R E S I S T A N C E High, Medium, and R A N G E Low. * This feature is available in all Precor fitness equipment. Note: When you make changes in the programming mode, the new settings replace the factory defaults.
Page 21: Programming Tips
30-second shutdown procedure. Changes made in the programming mode become the  default settings when the display resets to the Precor banner.
Page 22: Changing The Product Settings
You must be in the Programming mode before you can change the settings. To access the programming mode: At the Precor banner, press the following keys in sequence without pausing between selections: RESET, 5, 6, 5, 1, 5, 6, 5 Note: A PAUSE/RESET key appears on some products and functions the same as the RESET key.
Page 23 Press to choose or accept the displayed selection. Number keypad Returns user to the previous menu level without CLEAR saving changes. PAUSE/RESET Exits Programming mode and returns to the Precor banner. Note: The number keypad is disabled once you enter programming mode.
Page 24: Choosing A Language
Product Owner's Manual Use the following flowchart to navigate through the menu settings. Figure 3: Bike menu settings Choosing a Language The equipment can display user prompts, text, and user entries in several different languages. When the equipment is shipped from the factory, the default language is English. Note: Programming prompts are not affected by language selection.
Page 25 Product Features Selecting a U.S. Standard or Metric Display The equipment can display measurements in either Metric or U.S. Standard. The default factory setting is U.S. Standard. To change the display measurement: At the S E L E C T U N I T S prompt, press OK. Use the navigational arrow keys to select a unit of measure (U S or M E T R I C ).
Page 26: Setting A Pause Time Limit
1 and 120 seconds (two minutes). For example, if you set a pause time limit of 60 seconds, the display automatically resets to the Precor banner if no movement is detected and no key press occurs for one minute.
Page 27: Setting A Resistance Range
Product Features Setting a Resistance Range The bike resistance levels are low, medium, and high. Within each setting, 25 levels of resistance are available, but the chosen setting affects the overall resistance range. To set a resistance range: At the S E T R E S I S T A N C E R A N G E prompt, press OK and use the navigational arrow keys to choose L O W , M E D I U M or H I G H (L O , M E D , or H I on some equipment).
Page 28: Informational Displays
In general, you would only access this information if directed to do so by Precor Customer Support. To navigate through the informational displays, use the following flowchart. A table located after the flowchart...
Page 29 Product Features Note: The CLEAR key is located on the number keypad. If your product has a PAUSE/RESET key, use it in place of the RESET key called out in the flowchart.
Page 30 Product Owner's Manual Table 4. Informational Displays for all products Product Display Description H O U R The number of hours that the • M E T E R equipment has been in use. The equipment tracks the elapsed • minutes, but the value that appears is truncated to the nearest full hour.
Page 31 To view the error log: At the Precor banner, press and hold PAUSE/RESET for 4 seconds. 2. If D I A G S - I N F O R M A T I O N D I S P L A Y or E R R O R L O G appears, then press OK.
Page 32 Important: You cannot retrieve the error log once you have deleted it. You may want to resolve any issues you are experiencing with the equipment before erasing the error log. 4. Press RESET to return to the Precor banner.
Page 33: Educating Users
Chapter Educating Users This console offers an easy-to-follow display and multiple programs to help users meet their workout needs. The keypad lets them select data and control their workout session and SmartRate® provides a visual aid that monitors heart rate and workout intensity at a glance.
Page 34: Using Smartrate
Product Owner's Manual Using SmartRate® The Precor SmartRate® technology is a precise, easy-to-read heart rate monitor that helps users achieve their best personalized workouts. SmartRate displays actual heart rate information in relation to the user’s target zone for weight loss and cardiovascular training. This feature is visible during all workouts.
Page 35: Display Console
Chapter Display Console The display console is designed for ease of use. Use the following graphic and table to learn more about the console displays. Figure 4: Console parts...
Page 36 Distance, Stride, or Average Speed. An indicator light appears next to the item that is displayed. Pause/Reset key: Press the key once to pause the equipment and twice to return to the Precor banner. QUICKSTART: Press to begin your workout immediately.
Page 37: Using The Upper Display
Display Console Using the Upper Display The program profile supplies information about your programmed workout. A blinking segment in the profile indicates your position. The profile raises or lowers if you change your resistance. Figure 5: Parts of the program profile Keypads Use the keypads to enter program selections and display preferences.
Page 38 Product Owner's Manual PROGRAMS Keypad The PROGRAMS keypad provides access to all the exercise programs. To use the program keypad: Press the center of the key to view the top level program in its menu. 2. Press the OK key to confirm your selection. Table 6.
Page 39 Display Console Number Keypad The number keypad has several functions depending on what is connected to the equipment. Table 7. Connections Connection Description Computer If a computer is attached to the CSAFE connection (CSAFE on the equipment, the number keypad lets you compatible) enter your user ID and answer other setup prompts.
Page 40 Product Owner's Manual The CLEAR and ENTER keys provide the following functions: CLEAR: Use the CLEAR key to remove the last number being displayed. ENTER: Use the ENTER key to accept the number being displayed. Note: The OK and ENTER keys are usually interchangeable and provide the same function when no peripheral devices are attached to the equipment.
Page 41: Workout Options
Chapter Workout Options CAUTION: Before beginning any fitness program, see your physician for a complete physical examination. Know your physician-recommended heart rate target zone. To begin your workout: Face the display. 2. Hold on to a handlebar and step on the foot pedals. 3.
Page 42: Choosing Quickstart
Choosing QUICKSTART Use the Quickstart feature to begin an immediate workout. To use this feature: Begin pedaling. 2. While the Precor banner scrolls, press QUICKSTART to begin the Manual Program. Figure 6: QUICKSTART button QUICKSTART applies the following defaults: Prompts Default Value...
Page 43: Selecting A Program
Note: To change a value (program, time, weight, or age) that you have already entered, continue pedaling and press RESET to return to the Precor banner. Select a program and reenter the appropriate values. 4. Maintain a comfortable and consistent RPM while exercising.
Page 44: Storing Workout Statistics
Note: If the display is blank, you will need to maintain the minimum rate of motion to supply power. If the Precor banner appears, the equipment is not connected to a computer. If the equipment is connected to a computer, the following...
Page 45: Changing Programs In Mid-Session
Workout Options Changing Programs in Mid-session You can change programs in the middle of a session by selecting a new program from the PROGRAMS key menu and pressing OK. All accumulated statistics are transferred to the new program as you continue exercising. Certain programs, such as Basic HRC and Weight Loss, are not available for mid-session transfers due to set goals and program preferences.
Page 46: Pausing During A Workout Or The Cool-Down Period
Note: If the optional power adapter is attached, you do not have to continue the minimum rate of motion to view your workout statistics. When you complete the cool down period, the workout summary appears. When you are ready, press RESET to return to the Precor banner.
Page 47: Programs
Chapter Programs This section describes the programs available on the equipment. Use the following table to learn more about each workout program.
Page 48 Product Owner's Manual Graphic Program Workout Details Heading Manual This workout begins as a flat line. You can increase or decrease the resistance using the resistance key. The workout profile reflects changes you make and a blinking light in the column indicates your position in the workout.
Page 49: Program Tips
Programs Program Tips Begin at the Precor banner and choose a program by  pressing a PROGRAMS key or QUICKSTART.  While exercising, you need to sustain your exercise motion. Stopping any movement causes the equipment to shut down to conserve battery power.
Page 50 Product Owner's Manual Notes:...
Page 51 ...
Page 52 Precor Incorporated XBK 615 POM 302217-101 rev A 20031 142nd Avenue NE December 2012 P.O. Box 7202 Woodinville, WA USA 98072-4002...
Page 53 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike...
Page 54 ...
Page 56 Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be. Precor is widely recognized for its innovative, award-winning designs of exercise equipment.
Page 57 Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit). It is not packaged for individual sale.
Page 58 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety notices.
Page 59 Important Safety Instructions  Care should be taken when mounting or dismounting the equipment. For Treadmills: Do not use typing or web surfing features  while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
Page 60 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike  SPACING—The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standards and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: Treadmills—a minimum of 0.5 m (19.7 in.) on each ...
Page 61 350 pounds (160 kg). Use the equipment only for its intended purpose as  described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries. Do not operate the equipment where aerosol (spray) ...
Page 62 The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service.
Page 63 Important Safety Instructions Regulatory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio-frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between -20°C and 85°C (-4°F and 185°F).
Page 64 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 65: Exercise Equipment
The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards. Cardiovascular Type Equipment: CAN/CSA, IEC, EN 60335-1 (Household and similar ...
Page 66 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer European Applications CE compliance is claimed to the following directives: 2004/108/EC EMC Directive...
Page 67 Important Safety Instructions Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required.
Page 68 Do not attempt to service the equipment except for maintenance tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http://www.precor.com. Obtaining Updated Documentation Current Precor product documentation is available at http://www.precor.com/productmanuals.
Page 69 Table of Contents Important Safety Instructions ............ 3 Safety Precautions ................4 Educating Users ..................8 Hazardous Materials and Proper Disposal ........8 Product Recycling and Disposal ............8 Regulatory Notices for the RFID Module ........9 Regulatory Notices for Cardiovascular Exercise Equipment ..................
Page 70 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Self-Powered Features .............. 41 Informational Displays Prior to Shutdown ........42 Symptoms of a Low Battery ............42 Using the Optional Power Adapter ..........43 The Optional Power Adapter Kit ............ 43 Replacing the Battery ................
Page 71: Equipment
Assemble the equipment according to the guidelines in  this manual to ensure you do not void the Precor Limited Warranty. Important: Any damage caused during installation is not covered by the Precor Limited Warranty.
Page 72: Unpacking The Equipment
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Unpacking the Equipment The shipping container for this exercise bike consists of the following items: Wooden pallet  Cardboard base   Cardboard cover Foam spacers  WARNING Do not attempt to move the equipment off of the pallet by yourself.
Page 73: Hardware Kit (Not To Scale)
Assembling the Exercise Bike Hardware Kit (not to scale) Before you begin the assembly, verify that the following hardware items are packed with the equipment. Fasteners Quantity M12 x 80 mm sockethead screw M10 x 40 mm buttonhead screw M10 x 55 mm buttonhead screw M10 x 15 mm buttonhead screw...
Page 74: Required Tools
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Required Tools 6 mm hex wrench   10 mm hex wrench ⁵₃₂-inch hex wrench  13 mm open-end, box, or socket wrench  14 mm open-end, box, or socket wrench ...
Page 75 Assembling the Exercise Bike 2. Secure the rear stabilizer using two M10 x 40 mm buttonhead screws. Tighten the screws completely using a 6 mm hex wrench. Figure 3: Rear stabilizer attachment 3. Place the front stabilizer underneath the bracket at the front of the bike.
Page 76 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 4. Secure the front stabilizer using two M10 x 40 mm buttonhead screws. Tighten the screws completely using a 6 mm hex wrench. Figure 5: Front stabilizer attachment...
Page 77: Attaching The Seat Back And Bottle Holder
Assembling the Exercise Bike Attaching the Seat Back and Bottle Holder While the equipment is in use, the seat back flexes to support users of different shapes and sizes. Underneath the seat back, the bottle holder accommodates both left-handed and right-handed users.
Page 78 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 3. Swing the seat back assembly into place so that its four screw holes line up with the holes on the seat carriage bracket, as shown in the following figure. Figure 7: Positioning the seat back assembly 4.
Page 79 Assembling the Exercise Bike 5. Adjust the position of the seat back, then tighten the screws completely using a 6 mm hex wrench. 6. Connect the heart rate sensor cable in the handlebars to the cable you passed through the seat back support earlier, then position the handlebars in the handlebar bracket as shown in the following figure.
Page 80 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike To attach the bottle holder: Move the seat as far back as it can go. 2. Position the bottle holder so that the two tabs on its underside are aligned with the bottle holder bracket. 3.
Page 81: Installing The Upright Support And Cables
Assembling the Exercise Bike Installing the Upright Support and Cables DANGER Do not attempt to connect electrical power until all assembly procedures are complete and the console is properly installed. Before you begin this procedure, retrieve the cables for the console that you plan to install on this exercise bike, or for any Cardio Theater®...
Page 82 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 7. Lift the upright support and position its lower end over the upright support channel on the body assembly. Slide the support into position so that its screw holes line up with the corresponding holes on the body assembly, as shown in the following figure.
Page 83 Assembling the Exercise Bike 8. Insert the two M12 x 80 mm sockethead screws through the openings on the support and into the screw holes on the body assembly. Tighten the screws completely using a 10 mm hex wrench. Figure 14: Bolting the upright support into place...
Page 84: Making Sure The Unit Is Stable
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Making Sure the Unit Is Stable Make sure the unit is level before allowing anyone to use it. CAUTION: To eliminate movement, make sure the adjustable feet are in contact with the floor. To level the unit: Gently rock the unit.
Page 85: Installing The Console
Assembling the Exercise Bike Installing the Console Before you begin, make sure that the cables have been fed through the mounting bracket and their ends extend through the round opening at the base of the bracket. The television cable, along with any audio, video, or power cables needed to support a Cardio Theater screen or receiver, should be fed through the bracket and should extend through the opening at its upper end.
Page 86 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 3. Retrieve the serial number label you removed from the body assembly earlier. Remove the backing from the label and apply it inside the console at the upper right, as shown in the following figure. Figure 16: Serial number label location...
Page 87 Assembling the Exercise Bike 4. Route the flat, black base unit data cable to the left of the mounting bracket and about three-quarters of the way up the left side of the console, as shown in the following figure. Attach the base unit data cable to the eight-conductor modular jack labeled LOWER BOARD CONNECTION.
Page 88 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike 6. Insert four ¹₄-inch x ³₄-inch buttonhead screws through the screw holes in the tabs on the mounting bracket and into the screw anchors on the console. Tighten the screws completely using a ⁵₃₂-inch hex wrench. 7.
Page 89 Assembling the Exercise Bike 8. Position the back cover and attach the four 1-inch panhead machine screws, then tighten the screws completely using a #2 Phillips screwdriver. Figure 19: Reattaching rear cover screws...
Page 90: Breaking In The Equipment
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Breaking in the Equipment Precor equipment does not require an actual break-in period. However, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shipped.
Page 91: Maintenance
To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always...
Page 92: Daily Inspection
CAUTION: Read and follow the manufacturer’s instructions, particularly dilution instructions, before using any cleaner on Precor fitness equipment. Do not use concentrated cleaners at full strength, or acidic cleaners of any kind; such cleaners weaken the protective finish on the equipment and void the Precor Limited Warranty.
Page 93: Quarterly Maintenance
Maintenance Quarterly Maintenance Precor recommends that you clean and inspect the equipment more thoroughly once every three months. To perform quarterly maintenance: Remove the cover panels. 2. Vacuum out any debris, being careful not to bring the vacuum cleaner nozzle too close to any circuit board (unless your vacuum cleaner is protected against static buildup).
Page 94: Moving The Equipment
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Moving the Equipment The equipment is very heavy. If you plan to move it to a new location, obtain the help of an adult assistant and use proper lifting techniques. If the equipment includes roller wheels on one end, use the wheels to reduce the load on yourself and your assistant.
Page 95: Self-Powered Features
Chapter Self-Powered Features Important: This chapter of the manual describes Precor fitness equipment that can operate without being connected to AC power. This includes units equipped with P30 or P10 consoles. However, P80 consoles must be connected to AC power through their power supplies to operate.
Page 96: Informational Displays Prior To Shutdown
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins. In this mode, the console displays a countdown indicator and ignores all keypresses.
Page 97: Using The Optional Power Adapter
CAUTION: The internal cable kit must be installed by authorized service personnel. Do not attempt installation on your own as you could void the Precor Limited Warranty. For more information, refer to Obtaining Service. Important: If this equipment includes a P80 console, the optional...
Page 98: Replacing The Battery
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike Replacing the Battery The equipment’s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service.
Page 99: Commercial Cardiovascular Equipment Limited Warranty
CONDITIONS. Limited Warranty. Precor Incorporated warrants all new Precor products to be free from defects in materials and manufacture for the warranty periods set forth below. The warranty periods commence on the invoice date of the original purchase. This warranty applies only against defects discovered within the warranty period and extends only to the original purchaser of the product.
Page 100 Internet connectivity, such as Ethernet cabling, routers, servers and switches. Precor is not responsible for the quality of television, video, audio, or other media supplied to its products. This restriction applies to services, such as those provided by a cable or satellite television provider;...
Page 101 GIVEN ABOVE FOR THOSE SAME PARTS. PRECOR HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. PRECOR ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES,...
Page 102 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND STRICT LIABILITY), OR...
Page 103 ...
Page 104 Precor Incorporated RBK 615 PAG/OM 302216-101 rev A 20031 142nd Avenue NE Warranty #36286-114 P.O. Box 7202 December 2012 Woodinville, WA USA 98072-4002...

This manual is also suitable for:

Ubk 615

Precor RBK 615 Owner's Manual

Table of Contents

Important Safety Instructions

Product Features

Educating Users

Display Console

Workout Options

Programs

Table of Contents

Assembling the Exercise Bike

Maintenance

Self-Powered Features

Commercial Cardiovascular Equipment Limited Warranty

Quick Links

Chapters

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Precor RBK 615

Summary of Contents for Precor RBK 615

This manual is also suitable for:

Table of Contents