Whirlpool DU920QWDB5 Use And Care Manual page 23

1.Disconnect power s upply tothe
dishwasher.
2. Turnoffwatersupply tothedishwasher.
3. Remove the4 screws onthelower
access panel a ndremove the lower
access panel.
4. Placea shallow panunder thewater
supply valve. T hen,usea wrench to
disconnect thewaterinletfromthewater
supply valve. S eparate thewaterinlet
fromthewatersupply valveanddrain
waterintothepan.
5. Remove thespringclamp fromthewater
outlet a ndseparate f romthewater
supply valve; d rainwaterintopan.
6. Reconnect bothwaterinletandwater
outlet t othewatersupply valve.
7. Empty thepanandreposition i t under
thewaterpump.
8. Remove theclamp anddisconnect the
drainhosefromthewaterpump; d rain
waterintopan.
9. Reconnect drainhosetothewater
pump, b eingsuretoposition theclamp
overtheconnection.
10. Replace theloweraccess panel.
NOTE: I f yourdishwasher is connected t o
a garbage disposal, donotrunwaterinto
thesinkafterwinterizing. Thiscouldcause
waterto refill t hedrainhoseonyour
dishwasher.
Reconnecting
your dishwasher
1. Remove the 4 screws on the lower
access panel and remove lower
access panel.
2. Turn on the water supply to dishwasher.
3. Turn on power supply to dishwasher.
4. Run dishwasher through a complete cycle
and check for leaks.
5. Replace lower access panel.
Storing for the summer
Protect your dishwasher during the summer
months by turning off the water supply and
power supply to the dishwasher.
Figure 1
Water outlet Spring clamp
Water supply Water Drain
valve inlet hose
Figure 2
outlet Spring clamp
Water supply Water
valve inlet
Water pump
and motor
Water pump
and motor
23