Page 1
For Serial Nos. 720,000 & Higher VIKING HYDRO ™ Date Purchased Place Model No. And Serial No. Label Here (Included in Literature Engine Model No. and Spec. No. Pack) or Fill in Below Engine Serial No. (E/No) Model No. The Serial No. plate is located on the top front engine frame on the left hand side of the machine.
Page 2
3. Exmark being unable to ship the part and the Exmark parts order is received by 3:00 p.m., central time, Exmark pays for the part and freight. 4. If the part does not arrive overnight due to the shipper (UPS), the shipper pays for the freight and Exmark pays for the part.
Page 3
READ OPERATOR’S MANUAL BEFORE OPERATING OR SERVICING EXMARK EQUIPMENT. TABLE OF CONTENTS Description Page Decals................15 Electrical Group .............16 Engine Deck Group............ 7-10 36" Mower Deck ............3-4 48" Mower Deck ............5-6 Hydraulics Group ............. 11-12 ECS Upper Handles & Controls ....... 13-14...
Page 4
323-4 Screw, HH 3/8-16 x 3/4 ......8 Exmark red touch up paint (spray paint - P/N 1-850337 - .6 oz liquid bottle - P/N 103-9140). Use Pro-lock Nut Type (p/n 1-840022 .5 ml tube) on the setscrews. Requires installation of Micro-Mulch accessory for proper mulching. Mulch kit P/N MK362(36”) Apply Mobil HTS grease (P/N 103-5217 1.5 oz packet) (or a food-grade anti-seize) between the spindles &...
1-323729 Bearing ..........2 Exmark red touch up paint (spray paint - P/N 1-850337 - .6 oz liquid bottle - P/N 103-9140). Use Pro-lock Nut Type (p/n 1-840022 .5 ml tube) on the setscrews. Requires installation of Micro-Mulch accessory for proper mulching. Mulch kit P/N’s MK483.
Screw, HH 3/8-16 x 1 1/4....... 1 Exmark red touch up paint (spray paint - P/N 1-850337 - .6 oz liquid bottle - P/N 103-9140). Use Pro-lock Nut type Part No. 1-840022 (.5ml tube) on setscrew threads and on sheave retaining bolt in engine crankshaft.
Page 10
1-613089 Anchor, Spring ........2 Exmark red touch up paint (spray paint - P/N 1-850337 - .6 oz liquid bottle - P/N 103-9140). Use Pro-Lock nut type, Part No. 1-840022 (.5 ml tube) on shoulder bolts & setscrew threads. Use a Teflon Pipe Sealant or equivalent on pipe threads.
Nut, Whizlock 3/8-16 ......4 3290-357 Exmark black touch up spray paint – Gloss black. Use Pro-Lock nut type, Part no. 1-840022 (.5cc tube) on setscrew threads, on thumb latch screws, and on fuel fittings. Use Pro-Lock retaining type, Part no. 1-840023 (.5cc tube) on inside of bore of OPC hub and on fuel tank studs going into...
Need help?
Do you have a question about the VIKING HYDRO and is the answer not in the manual?
Questions and answers