Sharp EC-12TWT9 Operation Manual page 5

OPERATING INSTRUCTIONS
HOW TO ATTACH THE HANDLE TO VACUUM CLEANER
First remove the handle screw.
Then insert the base of the handle into
the top of the body' of the vacuum cleaner
as shown. (Fig. 1)
Handle
Fig.1
i , n
1
2
Line up the small hole on the handle
with the small hole on the rear of the
vacuum cleaner and insert the screw.
(Fig. 2), Be sure the screw is tightened
securely.
Handle screw Fig.2
HOW TO WIND POWER CORD
1
Insert the power cord
in the clip located on
the upper cord storage
hook as shown. (Ficj. 3) Clip
side
Fig.3
2
Wrap excess cord
around the cord stor-
age hooks to prevent
dragging and any inter-
ference with cleaning.
(Fig. 4)
Upper cord
storage hook
Fig.4
HOW TO RELEASE POWER CORD
r
Rotate the upper cord storage
hook downward for quick cord
release. (Fig .5)
Upper cord
storage hook
Fig.5