Dad Ax24 Microphone Preamplifier; Dad Ax24 Mic Preamp - Euphonix MC Media Application Controller Operation Manual

Euphonix Media Application Controller Operation Manual
NOTE: For System 5-MC owners, remember the MC mirrors one CM408T module, so
up to four CM408T modules can be used with one MC.
9. When finished adding controllers, click the OK button to close the dialog in
Final Cut Pro. In Soundtrack, click the Close button at the top left to close the
Preferences.
10. Restart the application or computer if initial communication is not achieved.
The MC connects and updates with new track information.
11.6

DAD AX24 Microphone Preamplifier

The DAD AX24 is a high-end EuCon-ized mic preamp from Digital Audio Denmark.
The AX24's parameters can be controlled from the MC/S5MC surface, including: Mic/
Line switching, Preamp Gain, Phantom On/Off, Phase, Mute, Channel Delay and
Mono/Stereo linking. The AX24 must be connected to the workstation computer via
USB link (available from DAD).
To enable EuCon in the DADMan software:
1. Open the DADMan Software on your workstation
2. Inititate USB communication with the device from the list of devices on the left
of the DADMan window.
3. Enable Eucon Controls from the File menu.
When the DADMan software is the focused application, its controls are dis-
played on the Input Knobset on the MC/S5MC surface.
Figure 11-21 DAD AX24 mic preamp
118
DAW Integration