Using The Adapter/Charger - GE CG735 User Manual

will
designed for _se: On 100_240 _oi_
Using the Adapter/Charger to Power Your Camcorder
I.
.
Plug in AC Outlet
(120V, 50/60Hz)
Adapter/Charger
POWER __f._/
Indicator
DC Adapter/Charger's
OUTPUT DC Cable
Jack
.
Connect one end of the adapter/
charger's cable to the adapter/
charger's DC OUTPUT jack and the
other end to the DC IN 9.6V jack on
the back of the camcorder.
Plug the adapter/charger into the
nearest AC outlet (120V, 50/60 Hz).
The POWER indicator on the
adapter/charger will light when it is
properly connected.
Notes: The adapter/charger cannot charge
the battery and operate the camcorder at the
same time. If you connect both, the
adapter/charger will power the camcorder.
Remove the adapter/charger's cable from
the DC OUTPUT jack to charge the
battery.
DC IN 9.6V Jack
When using the adapter/charger to power
the camcorder, the battery level indicator
may display m. This indicator is used
for battery operation and has no meaning
when using the adapter/charger to power
the camcorder.
To Remove the Adapter/Charger
1. Remove the adapter/charger's plug
from the AC outlet.
2. Remove the adapter/charger's DC
cable from the DC IN 9.6V jack on the
camcorder.
for any pu&ose other than charging the .....
EP096FS or EP096FL batte_ pack or
supplying power to the camcorder.
10